Beschreibung
Rework work lives or dies on reheat time. A joint that takes two seconds to come back to temperature is a joint that gets dragged, and a dragged joint on a fine pitch board is a repair that costs more than the component. The handle is the part of the system that decides how quickly heat returns after the tip touches the work.
This handle is built for the YIHUA 982 platform and accepts both C210 and C245 cartridges, which covers the two families most repair benches standardise on. The C210 range suits fine work where a small thermal mass and quick response matter, while C245 cartridges carry more heat into larger joints and ground planes where a fine tip would stall.
Certification covers CE, FCC and UL, and the handle is offered in two colour and set configurations: a green C210 set and a black C245 set, each in set one and set two arrangements. Matching the handle to the cartridges already on the bench is the practical decision, and the set option determines what arrives alongside it.
For anyone maintaining a station rather than buying a new one, the handle is the wear item. Replacing it restores the electrical contact and the grip that months of daily use take apart.
A station is only as quick as the handle it feeds.
Handles are the part of a soldering system that wears out first, because the cable flexes at the strain relief on every movement and the contacts inside the connector oxidise across hundreds of heat cycles. Replacing the handle is a repair rather than an upgrade, and it costs a fraction of a new station. Keeping a second handle configured for the other cartridge family on the bench is the other common reason to buy one, since it removes changeover from the middle of a rework session.
Bench Notes
- ✦ Compatible with the YIHUA 982 rework station platform
- ✦ Accepts C210 and C245 cartridge families
- ✦ Rapid reheat element for fine pitch rework and general soldering
- ✦ CE, FCC and UL certification
- ✦ Green C210 and black C245 handle configurations
- ✦ Set one and set two options to match existing bench stock
Technical Ledger
- Brand: YIHUA
- Model: 982 handle
- Cartridge Compatibility: C210 and C245 families
- Certification: CE, FCC, UL
- Colour Configurations: Green for C210 sets, black for C245 sets
- Set Options: Set 1 and Set 2
- Function: Soldering and electronic rework
- Station Platform: YIHUA 982
- Handle Type: Pencil style with rapid reheat element
- Customisation: Not applicable
- Origin: Mainland China
- Pack Contents: Handle and set components as selected by variant
What It Is For
This handle belongs on a repair bench that already runs the 982 platform and needs either a spare or a second handle set up for a different cartridge family. Running one handle with C210 cartridges for fine work and a second with C245 cartridges for heavier joints removes the changeover time that eats into a rework session. It also suits a bench that has worn out its original handle, since replacing the handle restores the electrical contact and grip without the cost of a new station. Hobbyists working through a first rework project on through-hole boards and simple SMD work will find the C210 configuration the easier starting point, while anyone repairing amplifier boards, power supplies or connector assemblies gets more value from the C245 setup.
Bench Questions
Q: Which cartridges fit this handle?
A: Both the C210 and the C245 cartridge families, depending on the configuration selected. The green sets are built around C210 and the black sets around C245.
Q: Will it work with my existing station?
A: It is designed for the YIHUA 982 platform. Match the handle to the station model on your bench before ordering.
Q: What does set one and set two mean?
A: The set options determine what arrives alongside the handle in the pack. Choose the set that matches the cartridges and accessories you already own.
Q: Is the handle certified?
A: Yes. Certification covers CE, FCC and UL.
Q: Can I use it for general soldering as well as rework?
A: Yes. The rapid reheat element handles both everyday through-hole work and fine pitch rework.
Q: What should I order as a spare?
A: A second handle in the other cartridge family is the usual choice, since it removes cartridge changeover from the middle of a session.
Q: Can the handle be repaired?
A: The handle is supplied as a complete unit. Replacement is the practical route once the cable or connector has worn through use.
Q: Does it come with cartridges?
A: Cartridge content depends on the set option selected. Check which set matches your bench before ordering a spare handle.
Q: How do I choose between C210 and C245?
A: C210 suits fine pitch work and small thermal loads. C245 carries more heat into larger joints, ground planes and connector assemblies.
Customer Reviews
Payment and Security
Ihre Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben keinen Zugriff auf Ihre Kreditkarteninformationen.