The Camlock | 2.8L CRD Diesel Engine Timing Tool Kit for Jeep, Chrysler and Holden

Sparen Sie 20%
EastSupplier PlatformArtikelnummer:1005001854311487-3PCS-China Mainland

Color: 3PCS
Preis:
$89.66 $112.07

Steuern inklusive Versand wird an der Kasse berechnet

Aktie:
Auf Lager

Beschreibung

Timing is the one adjustment a diesel engine will not forgive. The piston crown and the valve head share a clearance measured in fractions of a millimeter, and a belt that sits one tooth out of position turns that clearance into a collision. Every workshop that has done the job by eye, with a paint mark on the old belt and a hopeful turn of the crank, knows the feeling that follows the first compression stroke.

The Camlock removes the guesswork at the source. Three pieces of machined steel pin the camshaft, the crankshaft and the injection pump in their factory positions before the belt comes off, so the new belt goes on against a fixed reference instead of a memory. The set carries the same tool references the factory service manuals call for: VM 9991, VM 9992, EN-50029, EN-50030, EN-51025 and EN-51104. The pump locking tool is the piece most generic kits omit, and it is the piece that stops the injection pump sprocket from drifting while the retaining nut is loosened.

The kit is built for the VM Motori 2.8L CRD family and the vehicles that used it across three continents: Jeep Cherokee KK from 2008 to 2011, the Wrangler JK from 2007, the Chrysler Grand Voyager from 2008, the Dodge Nitro from 2007 to 2010, and the Holden Colorado and Trailblazer from 2012. Engine codes covered include VM64C, ENS, 49C, 50C, VM10D, VM11D, LWN and LWH. For a shop that sees one of these engines a month, the set pays for itself the first time it prevents a valve strike.

A belt is replaced in an afternoon. A bent valve set is remembered for years.

Key Features

  • ✦ Locks camshaft, crankshaft and injection pump in the factory timing position before the belt is removed
  • ✦ Cross referenced to OEM service tools VM 9991, VM 9992, EN-50029, EN-50030, EN-51025 and EN-51104
  • ✦ Covers the VM Motori 2.8L CRD engine codes VM64C, ENS, 49C, 50C, VM10D, VM11D, LWN and LWH
  • ✦ Injection pump locking tool engages the sprocket teeth to hold position while the retaining nut is broken loose
  • ✦ Camshaft plate locates on the reluctor at one end and bolts to the cylinder head face at the other
  • ✦ Hardened steel construction that holds shape under repeated torque cycles
  • ✦ Boxed set with each piece separated so the correct tool is found without sorting a drawer

Technical Specifications

  • Engine Family: VM Motori 2.8L CRD four cylinder diesel
  • Engine Codes: VM64C, ENS, 49C, 50C, VM10D, VM11D, LWN, LWH (Duramax)
  • OEM Tool References: VM 9991, VM 9992, EN-50029, EN-50030, EN-51025, EN-51104
  • Set Options: 3 piece, 4 piece and 5 piece configurations
  • Function: Camshaft, crankshaft and injection pump locking for belt service
  • Pump Tool: EN-51104 pattern, engages sprocket teeth
  • Vehicle Coverage: Jeep Cherokee 2008-2011, Wrangler 2007+, Grand Voyager 2008+, Dodge Nitro 2007-2010, Holden Colorado and Trailblazer 2012+
  • Material: Machined and hardened steel
  • Storage: Compartmented box
  • Origin: Mainland China

Where It Earns Its Place

Independent workshops that take on timing belt service for the VM Motori 2.8L diesel use the set as a fixed reference rather than a set of paint marks, which shortens the job and removes the callback risk. Fleet operators running Colorado and Trailblazer pickups keep a kit in the shop so the belt interval is handled in house instead of being sent out. Mobile mechanics who travel to farm and site vehicles carry the three piece configuration because it covers the belt job without the extra plates. Enthusiasts rebuilding a Cherokee CRD at home use the same tools the dealer tech uses, since the alternative is guessing at a four figure repair.

The EastSupplier Promise

Every unit is inspected before it leaves our warehouse, packed in protective packaging, and dispatched with tracking. If a piece arrives damaged or not as described, contact us within 30 days and we will make it right with a replacement or a refund. We answer messages in English within one business day.

Questions Buyers Ask

Q: Will this fit my 2008 Jeep Cherokee 2.8 CRD?

Yes. The kit is built around the VM Motori 2.8L CRD engine used in the Cherokee KK from 2008 to 2011, and it also covers the Wrangler JK, Chrysler Grand Voyager, Dodge Nitro, and the Holden Colorado and Trailblazer.

Q: Why do I need a locking kit instead of marking the belt?

Marks transfer the old belt position, not the factory position. If the engine was already a tooth out, or if the crank moves while the belt is off, the marks preserve the error. The locking plates hold the shafts where the service manual says they belong.

Q: Does the set include the injection pump tool?

The 3 piece set covers camshaft, crankshaft and pump locking. Larger 4 and 5 piece configurations add the remaining plates for engines that need the pump sprocket held separately. Check which configuration you are ordering before checkout.

Q: Can I use it on a Holden Colorado diesel?

Yes. The Colorado and Trailblazer from 2012 onward use the same VM 2.8L family, and the tool references match the Holden service procedure.

Q: What are the plates made from?

Machined and hardened steel, not cast pot metal. The plates are expected to hold their shape through repeated torque cycles in a working shop.

Q: Does it come with instructions?

The set ships as a boxed kit with the pieces labeled by position. Torque figures and the sequence belong to the vehicle service manual, and we recommend working from it rather than from a generic sheet.

Q: Is this an OEM tool or an equivalent?

It is a cross referenced equivalent built to the OEM tool dimensions listed on this page, including EN-51104 for the pump sprocket.

Q: How do I identify which engine code I have?

The engine code is stamped on the block and shown on the vehicle identification plate. The set covers VM64C, ENS, 49C, 50C, VM10D, VM11D, LWN and LWH, which spans the 2.8L CRD production run.

Q: Will the plates fit with the engine in the vehicle?

Yes. The kit is designed for in bay service. The camshaft plate bolts to the cylinder head face and the crank pin locates through the access point, so the engine stays in the chassis.

Customer Reviews

Customer Reviews

Based on 3 reviews
67%
(2)
33%
(1)
0%
(0)
0%
(0)
0%
(0)
T
Tabitha T.
Works, no torque sheet in the box

The kit did the job on a Holden Colorado and the pump tool fit the sprocket teeth properly. Four stars because it arrives as a box of plates with no torque sheet, so I worked from the workshop manual. Labelling each piece would save ten minutes.

R
Rufus R.
Measures right next to the OEM set

Put the plates against a borrowed dealer kit on the bench and the locating faces matched. Same steel thickness, and nothing flexed under torque. For a shop doing one of these engines a month the price is not really a question.

M
Merrick M.
Belt job on a Cherokee KK went clean

Used it on a 2008 Cherokee 2.8 CRD for the belt and water pump. The crank pin seated fully with the engine still in the car and the cam plate lined up without a fight. The pump locking tool is the piece that mattered, the sprocket stayed exactly where it was while I cracked the nut.

Payment and Security

PayPal

Ihre Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben keinen Zugriff auf Ihre Kreditkarteninformationen.

Versand schätzen

You may also like

Recently Seen