Beschreibung
A stage is a contract between performer and audience, and fog is how that contract is signed. It turns a hard beam of light into something the eye can actually read, gives a spotlight a body, and tells a room before the first note that something deliberate is about to happen. The Fog Vault exists because most affordable foggers break that contract halfway through the second set.
Inside the aluminum housing sits a 500W heating block paired with three three-in-one RGB LED beads, so haze and color come from a single unit instead of two pieces of gear fighting for the same square meter of truss. The 433MHz remote works at roughly fifteen meters, which is the difference between walking to the machine mid-show and pressing a button from the console. A 260ml fluid reservoir carries around an hour of intermittent output, and the preheat indicator tells you the coil is ready instead of making you guess by watching for smoke.
The cycle is the part that matters in real rooms: two to three minutes to first heat, then roughly twenty seconds between bursts, each burst lasting seventeen to twenty-two seconds and throwing two to three meters. That rhythm suits wedding first dances, DJ drops, band transitions, and the haunted-house corridor where timing is the whole effect. Rated IP30 with a working range of minus ten to forty-five degrees Celsius, it is built for venues that are not climate controlled.
Fog is not decoration. It is the material that makes light visible.
Key Features
- ✦500W heating block with three 3-in-1 RGB LED beads in one housing
- ✦433MHz wireless remote with roughly 15 m of usable range
- ✦Independent control of LED color and fog output from the same handset
- ✦260ml reservoir, about one hour of intermittent spraying per fill
- ✦Preheat indicator lights when the coil is ready to fire
- ✦17 to 22 second bursts with a 2 to 3 meter projection distance
- ✦Double-layer insulation body rated IP30 for stage and venue use
Technical Specifications
- Rated power500W
- Light source3 × 3-in-1 high-power RGB LED beads
- Control433MHz wireless remote, about 15 m range
- Input voltageAC 110-240V, 50/60Hz
- First heat time2 to 3 minutes
- Reheat cycleAbout 20 seconds between bursts
- Spray duration17 to 22 seconds per burst
- Projection distance2 to 3 meters
- Fluid capacity260ml, about 1 hour of use
- HousingAluminum alloy, double-layer thermal body
- Protection ratingIP30
- Working temperature-10°C to 45°C
- Dimensions and weight27 × 18 × 18 cm, 2 kg
Where It Belongs
Mobile DJs who need color and haze from one case, wedding planners lighting a first dance without renting a hazer, small venues and bars running three-night-a-week programming, theatre groups working black-box spaces, and seasonal attractions building fog corridors. It is equally at home behind a cover band in a sports bar as it is in a photography studio creating atmosphere for a portrait set, which is exactly the point of pairing LED color with fog in one chassis.
Frequently Asked Questions
Q: How long does it take to produce fog after powering on?
The first heat cycle takes two to three minutes; the preheat indicator lights up when the coil is ready. After that, reheating between bursts takes about twenty seconds.
Q: Can I control color and fog separately?
Yes. The remote allows independent switching of the LED beads and the fog output, so you can run color-only washes between fog bursts.
Q: What fluid should I use?
Standard water-based fog fluid only. Oil-based or scented fluids can foul the heater block and shorten the life of the pump.
Q: How much area does one unit cover?
Two to three meters of projection per burst is realistic for a small to mid-size room. For a large hall, position units at both ends of the stage.
Q: Does it work on 110V in the US?
Yes. The 110V US plug variant is built for North American voltage, and the unit accepts 110 to 240V input at 50 or 60Hz.
Design Notes
Fog machines fail for three reasons: a heater block that scales up from impure fluid, a pump that runs dry because the reservoir was empty and nobody checked, and a remote that only works when pointed directly at the receiver. The Fog Vault addresses each in the least glamorous way possible. The double-layer thermal body keeps the housing cool enough to handle between sets, the 260ml tank holds enough that you are not refilling mid-show, and the 433MHz handset holds a link across a room without line of sight.
Heat-up time is stated honestly at two to three minutes because that is what the coil actually needs. Vendors who quote fifteen seconds are quoting the second burst, not the first. Plan the preheat around your cue and the machine behaves predictably for the entire evening. Between bursts it cycles in roughly twenty seconds, which is fast enough for a drop every few minutes and slow enough that the coil is not being abused.
For touring, the practical detail is the 27 by 18 by 18 centimeter footprint and 2 kilogram weight. That is a case you can carry in one hand while holding a light stand in the other, which matters more at load-in than any spec sheet number.
Customer Reviews
Payment and Security
Ihre Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben keinen Zugriff auf Ihre Kreditkarteninformationen.