Beschreibung
Short wave listening in a city is a study in noise. Every switching supply, every LED driver and every neighbour's router puts a buzz across the band, and a long wire picks all of it up with the signal. The Quiet Loop is the countermeasure: a small active receive loop covering 500 kHz to 30 MHz, built to sit on a balcony and hear stations that a wire cannot pull out of the hash.
The physics is the reason it works. A magnetic loop responds to the magnetic component of the field, which falls away faster with distance than the electric component that most local interference is made of. That is where the claimed suppression of up to 30 dB against a long wire comes from, and it is why the loop has a figure-of-eight pattern with two deep nulls: rotate the ring until a noise source sits in a null and it drops away while the station stays. Coverage runs from the medium wave broadcast band up through the amateur and utility bands to 30 MHz, and the loop is directional by design rather than by accident.
Mechanically it is small: a 40 gram active element in a rainproof housing, a stainless steel ring, and USB power for the preamplifier, with 220 grams all in for the packed kit. Modular construction means the ring comes apart for storage and goes back together on a balcony rail or a roof without a tower, planning permission or a landlord conversation. One hard rule from the specification, and it matters: this is a receive only antenna, and connecting it to a transmitter will destroy the preamplifier.
The station was always there. The noise was the problem, and the null is the answer.
What Makes It Different
- ✦Active receive loop covering 500 kHz to 30 MHz without tuning
- ✦Magnetic pickup, with up to 30 dB rejection of local electrical noise
- ✦Figure-of-eight pattern with two deep nulls for interference rejection
- ✦Balcony and roof friendly, no tower or long wire required
- ✦USB powered preamplifier, no separate power supply to build
- ✦Stainless steel ring, rainproof housing, modular for storage
- ✦40 g active element, 220 g packed, receive only
Technical Specifications
- Frequency Coverage500 kHz to 30 MHz
- TypeActive receive loop, magnetic
- Noise SuppressionUp to 30 dB versus a long wire antenna
- PatternFigure-of-eight, two deep nulls
- PowerUSB powered preamplifier
- RingStainless steel, modular sections
- HousingRainproof, outdoor rated
- Product Weight40 g
- Package Weight220 g, 140 x 130 x 65 mm
- TransmitReceive only, never connect a transmitter
Where It Earns Its Place
City based short wave listeners are the core users, because the loop turns a hopeless balcony into a usable listening post without offending a landlord or a neighbour's television. Amateur radio operators use it as a receive antenna for medium wave and low band work where a transmit antenna is impractical. Utility and numbers station listeners, medium wave DXers chasing transatlantic signals, and anyone in a flat with a metal framed building around them get the same benefit: directivity and noise rejection instead of raw length. It also packs small enough for a hotel window on a trip.
The EastSupplier Promise
Sourced directly from vetted manufacturing partners, inspected before dispatch, and priced without distributor layers. If the item arrives outside specification, we replace it or refund it. Every listing on this store is curated by a human buyer, not bulk-imported and abandoned.
Questions Buyers Actually Ask
Q: Can I transmit through it?
No. This is an active receive antenna and connecting a transmitter will damage the preamplifier immediately. It is for listening only, on any receiver with an antenna input covering the medium and short wave bands.
Q: How does it connect to my radio?
Through the receiver antenna input, with the preamplifier powered from USB. Any short wave receiver with a standard antenna socket will drive it, from a portable to a desktop set with a coaxial input.
Q: Does it need to be outdoors?
It works best outdoors or in a window with a view, since the housing is rainproof and rated for permanent outdoor mounting. Indoors it will still outperform a wire in a noisy building, but a balcony or roof position is where the nulls do their job.
Q: Will it remove all my noise?
No, and no antenna will. It rejects the electrical noise that arrives with the electric field, and rotating the ring puts a null on a specific local source. Broadband hash from your own wiring still needs ferrite chokes and a clean power supply to solve properly.
Q: How directional is it in practice?
Deep enough that a slow rotation of the ring is the standard way to kill an interfering LED driver or router while keeping a station. You will find yourself treating the ring as a steering control rather than a fixed antenna.
Q: What do I need to get started?
The loop, its preamplifier and a USB power source, plus a receiver. Assembly is a few minutes with no soldering, and the modular ring sections store flat when the antenna comes down.
Customer Reviews
Payment and Security
Ihre Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben keinen Zugriff auf Ihre Kreditkarteninformationen.