Description
Most car mounts are cradles, and a cradle assumes a phone with square corners and a disposable edge. Modern handsets curve their glass over the frame and put display pixels within a millimetre of the boundary, which is why a spring-loaded cradle that grips the sides ends up pressing on the panel and, over a year of heat cycles, leaving a mark. The Apex Clasp takes the other approach: it holds the body of the phone, not the screen, and it does so with aluminium rather than moulded plastic that softens in a hot cabin.
The mechanism is a clamp on a multi-angle joint. Loosen, set the angle, tighten, and the arm stays where it was put instead of sagging under the weight of a large handset. Aluminium is the reason: it does not creep, it does not yellow, and it holds a thread far longer than the glass-filled nylon used in budget mounts. The finish is anodised in orange, grey or black so the mount reads as part of the interior rather than an accessory bolted on afterwards.
It is offered in two forms because buyers arrive with two different problems. The full set includes the clamp and the base that anchors it, which is what most people need for a first installation. The accessory option is the clamp assembly on its own, for anyone replacing a worn head on a base they already have, or building a mount onto an existing arm. Both accept a universal range of handset bodies, and neither requires drilling, adhesive curing time or a permanent change to the dashboard.
A mount should disappear into the drive. Only the navigation should be visible.
Design Details
- ✦Aluminium alloy body that resists cabin heat and does not creep over time
- ✦Multi-angle joint holds the angle you set instead of sagging
- ✦Clasp design grips the handset body, not the display edge
- ✦Arc-screen friendly, keeps pressure off curved glass
- ✦Universal fit across current handset bodies
- ✦Anodised finish in orange, grey and black
- ✦Available as a full set with base or as the clamp accessory alone
Mount Specifications
- Product Type: Car phone mount, clamp style
- Material: Aluminium alloy with polymer contact pads
- Mount Method: Multi-angle clasp on adjustable joint
- Compatibility: Universal, arc-screen and flat-screen handsets
- Adjustment: Tilt and rotate, tool-free
- Colours: Orange, grey, black
- Configurations: Full set with base, or clamp accessory only
- Installation: No drilling, no permanent dashboard modification
- Finish: Anodised, matte
- Package Contents: 1 x clamp mount (full set includes base)
Cars and Phones It Suits
The Apex Clasp suits drivers who run navigation on every trip and have already thrown away two plastic mounts that went slack in the first summer. It is chosen by the owner of a car with a curved or textured dashboard who cannot use a suction cup, by the delivery driver who mounts and unmounts a phone a dozen times a day and needs the joint to survive it, and by the buyer who wants the clamp on its own because the base on their existing mount is still good. In all three cases the requirement is the same: hold the phone exactly where it was placed, and stay silent about it.
Buyer Questions
Q: Will it press on my phone's curved screen edges?
A: That is the reason the clasp exists. It grips the body of the handset rather than clamping the display boundary, so pressure stays off the curved glass and off the pixels near the frame.
Q: What is the difference between the full set and the accessory option?
A: The full set includes the clamp and the base that anchors it to the car, which is the complete installation. The accessory option is the clamp assembly alone, for replacing a worn head or fitting to a base you already own.
Q: Does it work with a phone in a case?
A: Yes. The clamp opens across the body of the handset and accommodates a normal protective case. Very thick rugged cases may need the clamp set wider, which is a matter of adjustment rather than fit.
Q: Does installation damage the dashboard?
A: No. There is no drilling and no permanent modification. The mount is positioned and tightened, and it can be removed without leaving holes.
Q: Will the joint hold a heavy phone over bumps?
A: The joint is aluminium with a tensioned thread, which is what keeps it from creeping the way plastic ball joints do. Set the angle firmly and it holds through normal road vibration.
Q: Can it be rotated for landscape navigation?
A: Yes. The joint rotates, so the handset can sit upright for maps or sideways for a wider view, and the position is retained once tightened.
Q: Where does the mount sit if my car has a curved dash?
A: A clasp mount anchors around a trim edge or a rigid panel rather than relying on a flat surface for suction, which is why it suits curved and textured dashboards. Position it where the phone does not block a vent you use or a warning light you need to see.
Q: Will the finish wear through with daily use?
A: The body is anodised aluminium, so colour is part of the metal surface rather than a coating that peels. Edges may polish slightly over years of handling, but the finish does not flake the way painted plastic does.
Customer Reviews
Payment and Security
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.