Description
Every Cut Is a Decision Made in Half a Second. A barber reaching for the wrong pair of shears has already lost the line. The Cutting Room set keeps two blades within reach: a 5.5-inch cutting shear for clean, deliberate length, and a 28-tooth thinning blade for the sections that need weight removed rather than length taken.
The cutting blade is forged from 9CR13 alloy and hardened to HRC 58-60, hard enough to hold an edge through a working week but still serviceable on a whetstone. Blunt tips keep the points away from scalps and ears, which matters most when the chair holds a child. A single tension screw adjusts the pivot, so the feel of the cut stays where the hand expects it.
The thinning blade removes roughly 25 percent of the hair in each pass, which is the range that softens a hard line without leaving a visible notch. Both blades arrive sharpened and ready, checked before packing and fixed in place for shipping. Left-handed users should look elsewhere. For everyone else, this is a working tool at a working price, with a leather case or paper box to keep it that way.
Any shears that cut hair will eventually dull, and the difference between a tool that lasts and one that does not is how it is treated between cuts. Hair holds grit, and grit wears a blade faster than hair ever will, so the pair should be wiped clean after each client and dried before it goes back in the case. Dropping them, cutting paper with them, or leaving them open on a counter all shorten the edge. Treated properly, 9CR13 at HRC 58-60 will hold through months of shop work before it needs a pass on a whetstone.
Sharpness is not a feature. It is the entire job.
Key Features
- ✦ 5.5-inch cutting shear, about 15.5 to 16 cm overall
- ✦ 9CR13 stainless alloy hardened to HRC 58-60
- ✦ 28-tooth thinning blade with a 25 percent removal rate
- ✦ Blunt safety tips for scalp and ear protection
- ✦ Adjustable tension screw for consistent blade feel
- ✦ Balanced handle design that reduces fatigue over long sessions
- ✦ Surface plating and polish for wear resistance
- ✦ Supplied with leather case or paper box, fixed in transit
Technical Specifications
- Size: 5.5 inch (approx. 15.5 to 16 cm)
- Blade Material: 9CR13 stainless steel
- Hardness: HRC 58 to 60
- Thinning Teeth: 28 teeth, approx. 25% thinning rate
- Tips: Blunt, safety ground
- Tension: Adjustable pivot screw
- Hand: Right-handed
- Finish: Surface plating and polish
- Model: 5504
- Package: Leather case or paper box
Where It Belongs
Built for the working chair. Barbers use the cutting shear for scissor-over-comb work and the thinner for blending the heavy sections, so a full service can run without a single blade change. Salon stylists keep the pair for precision work on fine hair, where a 25 percent thinning rate removes bulk without exposing the scalp. Home users who cut their own family hair get blunt tips near the ears and enough hardness that the blades still cut properly after a year.
Keeping the Edge
Wipe both blades with a dry cloth after use and oil the pivot screw occasionally. Store them closed in the supplied case rather than loose in a drawer, where they will contact other metal. Avoid cutting paper, plastic or dry trimming with these blades; a dedicated paper shear costs less than a re-grind. When the cutting shear starts to push hair instead of slicing it, that is the signal for a light honing rather than a harder squeeze on the tension screw. Adjust the tension so the blades close under their own weight when held open and released.
Frequently Asked Questions
Q: Is this set suitable for left-handed users?
No. Both blades are ground for right-handed cutting. Left-handed use will feel imprecise and will not produce a clean line.
Q: What does the 25 percent thinning rate actually do?
It removes about a quarter of the hair in each pass, which softens weight and blends lines without leaving a visible gap or notch.
Q: Do the shears need sharpening before first use?
No. Both blades arrive sharpened and ready to cut. Every pair is checked before packing.
Q: What is the steel and how hard is it?
9CR13 alloy, hardened to HRC 58-60. That hardness holds an edge through regular professional use and can be re-honed when needed.
Q: Are the tips safe to use on children?
The cutting shear has blunt tips specifically for this. Keep the thinning blade away from the scalp and always comb the section out before cutting.
Q: How is the tension adjusted?
Turn the pivot screw to set how freely the blades close. Adjust until the shear cuts without pulling.
Q: What comes in the box?
The cutting shear and the thinning blade, protected by either a leather case or a paper box depending on the option ordered.
Q: How should I store the shears?
Closed, in the supplied case, with the blades clean and dry. Loose in a drawer they will knock against other tools and lose their edge.
Q: When do they need sharpening?
When the cutting shear starts pushing hair rather than slicing it. Wipe and oil between clients and a light honing will keep them in service for months.
Customer Reviews
Payment and Security
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.