Description
Every Cut Has a Correct Speed. Most Tools Give You One.
The Edge Variable runs a 125 mm disc on a brushless motor at up to 10000 rpm, and it lets you dial that speed down instead of pretending every material is steel plate. Full speed for a cut-off wheel through rebar, reduced speed for a flap disc on a painted panel, low speed for a wire brush that would otherwise throw bristles. An M14 spindle takes standard European accessories, which means the discs you already own fit.
The brushless motor removes the two failure points that end the life of a cheap grinder: the carbon brushes and the heat they generate. What is left is a tool that holds rpm under load, runs cooler in a long session and draws less from the pack, so a 2.0 Ah battery behaves closer to a larger one. The body is built for an 18 V B-series lithium pack and accepts 2.0 to 5.0 Ah cells.
Configuration is deliberately open. Buy the bare tool if you already run that battery platform, or take a one or two battery set if you are starting from nothing. The machine does not care about your bench, your shed or your van, only about the disc you fit and the speed you choose.
Think about what a grinder actually does in a day. Ten minutes of cutting, twenty of dressing, an hour of wire brushing, then it sits idle. A cordless brushless machine matches that pattern better than a corded one, because the idle time belongs to the battery swap rather than the cable. Fit the disc for the task, set the speed for the material, and the tool disappears into the work, which is the highest compliment a power tool can receive.
Control is not a limitation on power. It is what makes power usable.
Key Features
- ✦125 mm disc capacity with an M14 spindle for standard European accessories
- ✦Brushless motor holding up to 10000 rpm with no carbon brushes to replace
- ✦Variable speed dial to match rpm to steel, stainless, masonry or paint
- ✦Runs on 18 V B-series lithium packs, 2.0 to 5.0 Ah recommended
- ✦Cooler operation and lower draw under sustained load
- ✦Bare tool, one battery and two battery configurations to match what you already own
- ✦Compact body for one-hand work in corners, welds and pipe runs
Technical Specifications
- Disc diameter: 125 mm
- Spindle thread: M14
- Motor: Brushless
- No-load speed: Up to 10000 rpm
- Voltage: 18 V
- Speed control: Variable, dial adjustable
- Battery compatibility: Makita B-series 18 V pin fit, BL1830 / BL1840 / BL1850 class
- Battery exclusion: Not compatible with DC18WA, BL1813G, BL1413G packs
- Recommended capacity: 2.0 Ah to 5.0 Ah
- Certification: CE
Where It Works
Fabricators use it for weld dressing and cut-off work in places a cord will not reach. Auto body shops use it with a flap disc for panel prep and paint removal. Maintenance teams use it on pipe, brackets and seized fasteners. Home renovators use it for tile, rebar and rust, where a corded grinder is awkward and a rotary tool is too small.
Questions Buyers Ask
Q: Is the battery included?
It depends on the variant. Bare tool, one battery and two battery sets are all offered, so check the option you select before checkout.
Q: Will my Makita batteries fit?
The tool takes 18 V B-series packs with the standard pin layout, including BL1830, BL1840, BL1850 and BL1850B. Older compact packs such as BL1813G and BL1413G do not fit.
Q: Can I cut stainless with it?
Yes, with the correct disc. Use a dedicated stainless cut-off wheel, keep the speed moderate and avoid overheating the cut edge, which causes discolouration and corrosion.
Q: What disc size do I need?
125 mm discs with the appropriate bore for an M14 spindle. Do not fit a larger disc to gain depth, because the guard and the rpm rating will not match.
Q: Does variable speed help with wire brushing?
It does. Running a wire brush at full speed throws bristles and burns the work. Reducing rpm keeps the brush intact and the surface intact.
Q: Is it suitable for continuous production use?
It is a professional-grade tool for site and shop work, and it will handle long sessions better than a brushed grinder. For uninterrupted all-day use, plan on spare packs.
Customer Reviews
Payment and Security
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.
