Description
Cleaning a third-floor window by hand requires a ladder, a second person, and a tolerance for risk that most people only pretend to have. A window robot replaces all three with a machine that attaches to the glass, tracks its own edges and works the pane in overlapping passes. The engineering question is not whether it cleans, but whether it stays attached, and that is decided entirely by suction and edge sensing.
This unit runs two suction discs at a combined 5600 Pa, which is roughly double the 2800 Pa of a single-disc robot. Two discs do more than add force: they provide redundancy, so a seal loss on one side does not become a fall on the other. Around that, the machine carries multi-point mechanical protection, boundary detection that reads the frame and stops before the edge, and a UPS circuit that holds the vacuum for up to 20 minutes if the mains power drops mid-cycle.
A robot that cleans well is useful. A robot that cannot fall is the one you leave running while you are out of the room.
The Safety Engineering, In Plain Terms
- ✦ Two suction discs producing a combined 5600 Pa of grip, roughly double a single-disc robot
- ✦ Boundary detection that reads the window frame and stops the machine before the edge
- ✦ Fall-prevention logic that checks position continuously rather than only at the frame
- ✦ UPS backup holds suction for up to 20 minutes if mains power is interrupted mid-cycle
- ✦ Three cleaning modes: vertical passes, horizontal passes, and edge-tracking runs
- ✦ Slim 0.95 kg body that reaches corners and narrow panes a bulky unit cannot
- ✦ 100 to 240V input with a 2 metre cord, and a spray bottle is used to damp the cleaning cloth before the run
Technical Specifications
- Suction: 5600 Pa, dual disc
- Disc Configuration: Twin suction discs with multi-point protection
- Safety Systems: Boundary detection, fall prevention, UPS power-failure backup
- Power-Failure Backup: Up to 20 minutes of held suction
- Cleaning Modes: 3 (vertical, horizontal, edge-tracking)
- Machine Weight: 0.95 kg
- Body: Slim, low-profile chassis
- Voltage: 100 to 240 V
- Cord Length: 2 m
- Operation: Automated pass cycle with repeat coverage on the upper track
- Brand: TOKER
- Plug Type: EU
What It Is Actually For
The application people buy it for is the window nobody wants to reach. Above a kitchen worktop, over a staircase, behind a fixed sofa, on the inside of a floor-to-ceiling pane where the outside face is fine but the inside is impossible to finish without a smear. Set the machine, damp the cloth, and the pass cycle covers the pane in overlapping runs rather than the vertical stripes a human arm produces.
It is also worth thinking about it as a maintenance tool rather than a deep-clean tool. Used monthly, a robot keeps a large pane from developing the baked-on film that eventually requires a squeegee and a ladder to remove. That monthly rhythm costs about ten minutes and removes the annual afternoon that nobody schedules.
The 0.95 kg body and slim chassis are what make it usable on narrow panes and in corners, and because the machine tracks its own boundary rather than relying on you to steer, the person operating it does not need to be the person who normally does the windows. That is often the point: the household member who can manage a ladder is not always the one who is home on a Saturday.
Practical Questions
Q: What stops it from falling off the glass?
Three systems work together: dual suction discs at 5600 Pa, boundary detection that stops the machine at the frame, and a UPS circuit that holds suction for up to 20 minutes if the power drops mid-cycle.
Q: Does it need water or spray?
Lightly damp the cleaning cloth on the machine with a spray bottle before the run. A damp cloth lifts the film that a dry pass leaves smeared, and the robot does the rest of the work.
Q: Will it work on double-glazed windows?
Yes. Suction holds against the outer glass surface, so double and triple glazing are both fine. It is not intended for textured, frosted or heavily etched glass, where the seal cannot form.
Q: How long does a full window take?
A standard domestic pane runs in a few minutes per pass cycle, and the machine repeats coverage on its upper track rather than needing you to reposition it. Large floor-to-ceiling panes take longer but need no supervision.
Q: What is the plug type?
This unit is supplied with an EU plug and a 2 metre cord, and the 100 to 240V input covers other regions with a plug adapter.
Q: Does it clean the frame or the corners?
The slim body and edge-tracking mode get closer to the frame than a bulky cleaner, but you should expect to finish the last few millimetres by hand on each side.
Q: Can it be used on the outside of an upstairs window?
Yes, and that is the main reason to own one. Because the machine holds itself to the glass, you are not leaning out to guide it, which removes the part of window cleaning that causes accidents.
Customer Reviews
Payment and Security
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.