The Load Bearer | Four-Leg G80 Chain Sling, 5-Ton, 5/16-Inch

Economisez 20%
East Supplier PlatformSKU: 1005002863268738-8mm-5 Ton-CZECH REPUBLIC-1.5m

Prix:
$143.70 $179.62

Taxes incluses Frais de port calculés au paiement

Stock:
En stock

Description

Nobody remembers the lift that went normally.

Rigging is arithmetic done in the open air, and the number that matters is not the one printed on the tag. A four-leg sling rated at 11,000 lbs does not lift 11,000 lbs when the legs sit at thirty degrees from horizontal, because load angle converts vertical capacity into vector components. Every competent rigger knows this. Every year, someone who does not know it drops a machine.

This assembly is G80 manganese steel chain with alloy steel hooks: 5/16 inch (8 mm) chain, four legs, 11,000 lb / 5 tonne working load, safety factor 4:1, powder coated for abrasion and moisture. The hooks are self-locking, so a load cannot slip its seat when the tension momentarily relaxes, which is exactly the moment a slip hook fails. Three working lengths are offered, 1.5 m, 3 m, and 4 m, because a sling that is too long is a control problem and one that is too short is a geometry problem.

Grade 80 is not a marketing grade. It is the alloy specification that carries certification and traceability in regulated lifting, it resists deformation at high temperature better than G43 or G70, and it is what an inspector expects to see when your lifting gear is audited.

Capacity is a number. Control is a discipline. This sling gives you the first and assumes you bring the second.

Built for Repeat Audits

  • ✦G80 manganese alloy steel chain with alloy steel hooks, the grade recognised in regulated lifting inspection.
  • ✦11,000 lbs / 5 tonne working load on a four-leg assembly, with a stated 4:1 safety factor.
  • ✦Self-locking safety hooks that stay seated when tension briefly releases, preventing load slip.
  • ✦Powder coated finish resists abrasion, moisture, and the chain-on-chain wear of daily yard work.
  • ✦Breaking strength above 800 MPa on the chain, so deformation is not the failure mode under rated load.
  • ✦Three working lengths: 1.5 m for tight plant rooms, 3 m general purpose, 4 m for tall frames.
  • ✦Four-leg geometry with adjusters, so uneven loads can be trimmed rather than shimmed.

Technical Specifications

  • Chain grade: G80 manganese alloy steel
  • Chain diameter: 5/16 inch / 8 mm
  • Legs: 4, with adjusters
  • Working load limit: 11,000 lbs / 5 tonne
  • Safety factor: 4:1
  • Working lengths: 1.5 m (5 ft) / 3 m (10 ft) / 4 m (13 ft)
  • Hook type: Self-locking alloy steel safety hooks
  • Chain breaking stress: above 800 MPa
  • Finish: Powder coated
  • Standards: CE marked, grade 80 alloy

Where It Earns Its Place

Machine shops and fabrication yards use this for moving fixtures, dies, and weldments where a forklift cannot reach. Construction crews hang it from an excavator or overhead beam to place precast sections and structural steel. Vehicle workshops lift engines and subframes; marinas lift outboards and dock sections.

It also earns its keep in the unglamorous middle of industrial work: pulling a stuck pump, steadying a load while it is bolted down, and holding a frame plumb during a weld. Anywhere a chain and a hook are faster than a crane and safer than a strap.

Rigging Questions, Answered Plainly

Does a four-leg sling lift four times one leg's capacity?

Not in practice. The rated assembly capacity already accounts for the leg configuration, but as leg angle opens toward horizontal the vertical component drops. Keep legs as close to vertical as the load allows and never exceed the assembly rating. For multi-leg lifts, use the manufacturer's angle factor table.

How often should lifting chain be inspected?

In most jurisdictions, before every use by the operator, and at documented intervals by a competent person, typically six-monthly for general use and more often in aggressive or high-cycle environments. Look for link elongation, gouges, bent links, and hook throat opening beyond limits.

Can I shorten a leg to level an uneven load?

This assembly includes adjusters precisely for that. Level the load by adjusting leg length rather than by adding spacers under the hook, which is how hooks get side-loaded and opened.

Is G80 suitable for overhead lifting of people?

No. Never use this or any general lifting sling for lifting personnel. Man-rated equipment is a separate certification category with different design factors.

What temperature range is safe for G80 chain?

Grade 80 is generally rated for working temperatures up to around 200 C without derating, with capacity falling at higher temperatures and the alloy losing temper above roughly 400 C. Do not use it on hot work without confirming the derating curve.

Can I use it outdoors in rain and salt air?

Yes, with discipline. Powder coating protects the chain body, but inspect for coating damage after coastal use and rinse, dry, and re-protect. Never let a chain sit in a puddle of salt water between jobs.

The EastSupplier Promise

Every unit is inspected before it leaves the warehouse, packed against transit damage, and backed by a 30-day return window. If a specification on this page does not match what arrives, we replace it. Questions before you order go to a human, not a bot.

Customer Reviews

Customer Reviews

Based on 3 reviews
67%
(2)
33%
(1)
0%
(0)
0%
(0)
0%
(0)
I
Ivo L.
Better than the strap we were using

Replaced a webbing sling that was getting cut on fabricated edges. G80 chain does not care about sharp corners, and the hooks cannot slip when the load settles. The 3 m length is the one to buy for general shop work.

W
Wendell D.
Solid sling, mind your leg angles

Four legs at 5 tonnes handles our skid-mounted pumps well. Worth remembering that the capacity drops as the legs open toward horizontal, so we keep them close to vertical. Chain shows no elongation so far.

C
Cato M.
Inspected and passed on first look

Our lifting gear gets a documented inspection every six months and these passed without comment. Self-locking hooks seat firmly, powder coat is intact after two months of yard work, and the adjusters let us trim an uneven engine load.

Payment and Security

PayPal

Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.

Estimer la livraison

You may also like

Recently Seen