Description
Light is the only material a filmmaker never has to ship. It arrives folded inside a bag, hangs in the air for a frame or two, and is gone before anyone asks where it came from. The Luminary Wand exists for exactly that interval: a half-metre tube of full-colour light that weighs less than a paperback and mounts wherever a camera can already point.
Inside the aluminium barrel sit three banks of thirty-eight emitters, white and yellow and RGB, behind a 120-degree diffuser and driven at ten watts. Colour temperature sweeps without steps from 2500K to 9000K, and a colour rendering index of 95 at the warm end keeps skin from turning grey under tungsten colour. Illuminance behaves the way physics insists it must: 913 lux at thirty centimetres, 360 at half a metre, 105 at a full metre.
The 3300mAh cell holds maximum output for an hour or more and refills over Type-C in roughly two and a half hours, which quietly turns a phone charger in a hotel room into a lighting budget. Twenty built-in effects cover the frames where a static source is the wrong answer: a patrol beacon, a television flicker, a slow lightning build.
A light you can hide inside the shot is worth more than a strobe you build a set around.
What the Light Does
- ✦Full-colour RGB alongside bi-colour white, inside one 37 x 37 x 500 mm tube
- ✦Stepless 2500K to 9000K sweep with 0 to 100 brightness control
- ✦10W output measuring 913 lux at 0.3 m and 95 CRI at 2500K
- ✦Twenty preset effects for mimicry, motion cues and music sync
- ✦3300mAh internal cell holding 60 minutes or more at full brightness
- ✦Type-C charging back to full in about two and a half hours
- ✦Quarter-inch thread and magnetic base for cages, tripods and steel
- ✦202 g body with a 120-degree beam angle
Technical Specifications
- Dimensions 37 x 37 x 500 mm (1.45 x 1.45 x 19.68 in)
- Weight approximately 202 g
- Emitter banks 38 white + 38 yellow + 38 RGB
- Power 10W
- Colour temperature 2500K to 9000K, stepless
- Brightness range 0 to 100 percent
- CRI 95 at 2500K
- Illuminance 913 lux at 0.3 m, 360 lux at 0.5 m, 105 lux at 1 m
- Beam angle 120 degrees
- Battery 3300mAh, 3.7V, built in
- Runtime 60 minutes or more at maximum brightness
- Charging Type-C, about 2.5 hours to full
- Mounting 1/4 inch thread plus magnetic base
- In the box VL119 RGB wand, Type-C cable, user manual
Where It Earns Its Place
This is a working tool for people who shoot alone. Wedding videographers use it as a hair light on a dance floor where there is no room for a stand. Product photographers tape it inside a light tent to add a colour kick to brushed metal. Streamers clamp it behind a monitor for a rim that separates a subject from a dark room. Property shooters keep one in the boot for windowless bathrooms, and event crews hang two in a doorway as an emergency path light when the house lights fail. Anywhere a studio light is too heavy, too slow or too visible, this is the source that gets used instead.
Questions From the Set
Q: Is the colour temperature truly continuous, or stepped?
A: Continuous. The dial moves through the full 2500K to 9000K range without preset stops, so a mixed-lighting room can be matched rather than approximated.
Q: Can it run while charging?
A: Yes. It works from external power over Type-C, which makes it usable for a full-day shoot with the battery as backup only.
Q: How long does it actually last at full power?
A: Sixty minutes or more at maximum brightness on a full charge. Dropping to half output roughly doubles that.
Q: Will it fit my tripod or camera cage?
A: There is a quarter-inch thread at the base, the standard fitting for tripods, cages and clamps, plus a magnetic base for steel surfaces.
Q: What is the difference between the one piece and two piece option?
A: The one piece option is a single wand. The two piece option ships two, which is the practical minimum for a key and a fill, or a matched pair for an interview.
Q: Is 10W bright enough to be a key light?
A: For a face at close range, yes. At three metres it is a fill or accent rather than a key, and that is the honest use for a wand of this size.
Q: Does it come with a case?
A: It ships with the wand, a Type-C cable and a manual in a retail box. A protective tube case is not included.
Q: Can I use the effects for stills, not just video?
A: Yes. The twenty presets are static-capable, so flicker, beacon and lightning effects can be held for a photograph rather than a sequence.
Customer Reviews
Payment and Security
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.