The Press Set | 26-Piece Universal Bearing and Seal Driver Kit

Economisez 20%
East Supplier PlatformSKU: 1005008232948150-GERMANY

Prix:
$214.26 $267.82

Taxes incluses Frais de port calculés au paiement

Stock:
En stock

Description

A bearing does not care how hard you hit it. It cares where the force lands.

Drive a bearing in by its outer race and it seats cleanly. Drive the same bearing by its inner race and you transfer the entire press load through the rolling elements into the raceway, brinelling the surface you were trying to protect. The bearing then runs rough, whines at speed, and fails a month later in a way that looks like a manufacturing defect and is actually a tooling error.

This 26-piece set exists to make the correct force path the easy one. Twenty press sleeves span 34 to 72 mm inside diameter and 44 to 82 mm outside diameter, stepped discs that sit flush against the race you are pressing and clear the one you are not. Two end caps close the assembly for seals and blind housings. Four pulling spindles with nuts convert the same discs into a puller for extraction, so removal and installation stop being two separate tool purchases.

The kit is described as universal, and in this category that word is defensible: passenger cars, light commercial, and heavy goods vehicles all use bearings in that size band, and the disc stack covers the step increments that matter rather than pretending one disc fits everything.

The right driver costs less than the second bearing.


Why a Stepped Set Beats a Hammer and a Socket

  • ✦Twenty press sleeves in 34-72 mm inside diameter and 44-82 mm outside diameter cover the common automotive and light industrial bearing band.
  • ✦Stepped disc geometry contacts the outer race, keeping press force off the rolling elements and preventing brinelling.
  • ✦Four pulling spindles with nuts turn the set into an extractor, so one kit handles pressing in and pulling out.
  • ✦Two sleeve end caps handle seals, blind housings, and bushes that cannot be driven from behind.
  • ✦Works with a hydraulic press, a bench vice, or a draw bolt, so it does not demand a workshop upgrade.
  • ✦Labelled sizes speed selection and reduce the trial-and-error that damages housings.
  • ✦Supplied in a moulded case, which matters because loose discs in a drawer become chipped discs.

Technical Specifications

  • Pieces: 26
  • Press sleeves: 20, inside diameter 34-72 mm, outside diameter 44-82 mm
  • End caps: 2
  • Pulling spindles: 4, with nuts
  • Application: Bearings, bushes, seals, silent blocks, ball bearings, rubber bearings
  • Vehicle coverage: Passenger cars, LCV, HGV, domestic and import
  • Drive methods: Hydraulic press, vice, or draw bolt
  • Case: Moulded storage case included
  • Material: Hardened steel discs, plated finish
  • Typical jobs: Wheel bearings, suspension bushes, crank and cam seals, gearbox bearings

The Jobs This Set Was Designed Around

Wheel bearing replacement is the single most common use: pressing a hub bearing into a knuckle without loading the raceway, then pulling the old one out with the spindles instead of a slide hammer that distorts the housing bore.

Suspension and driveline work follows: control arm bushes, subframe mounts, engine and gearbox seals, differential bearings, and the silent blocks that a hammer destroys. Front-end shops, transmission rebuilders, and anyone servicing agricultural or plant equipment will use the mid-range discs constantly.

Selection and Use

How do I choose the right disc for a bearing?

Measure the outer race outside diameter for installation, and the inner race bore for removal where access allows. Pick the largest disc that contacts the race fully without touching the housing bore. If two discs are close, choose the one that sits flatter.

Will this work on a sealed bearing where I cannot see the races?

Yes, because the disc presses on the outer ring face, which is visible on almost every sealed bearing. Do not press on the seal lip itself. If the seal is flush and sacrificial, use an end cap.

Can I use it with an impact gun?

Use steady force, not impact. A press or a vice gives controlled load. Impact tools shock-load the disc edges and can shatter hardened steel.

Are all 26 pieces steel or are some plastic?

The press discs and spindles are steel. Treat them as tooling, not consumables: keep them dry, wipe them after use, and store in the case so the machined faces stay flat.

What is the largest bearing this covers?

82 mm outside diameter on the disc face. Larger hubs and commercial wheel bearings need a dedicated set. If your work is mostly heavy truck, buy a specific kit rather than stretching this one.

Does it cover motorcycle and small equipment bearings?

Yes for the smaller end, though the 34 mm minimum inside diameter means the very small bearings found in bicycles and small motors are below its range. For those, use a dedicated small driver set.

The EastSupplier Promise

Every unit is inspected before it leaves the warehouse, packed against transit damage, and backed by a 30-day return window. If a specification on this page does not match what arrives, we replace it. Questions before you order go to a human, not a bot.

Customer Reviews

Customer Reviews

Based on 3 reviews
67%
(2)
33%
(1)
0%
(0)
0%
(0)
0%
(0)
O
Ozan T.
Excellent kit, needs a press or vice

No complaints about the tooling, but be aware it is a driver set, not a press. You will want a hydraulic press or a sturdy vice. With those it does exactly what it says and the end caps are handy for seals.

N
Nikolai R.
The disc range covers everything I touch

Cars, a light van, and a tractor front hub all fell inside the 34 to 72 mm band. Having twenty discs means there is always one that sits flat. Case keeps them from getting chipped in the toolbox.

O
Ondine C.
Saved a hub without wrecking the race

Pressed a wheel bearing into an aluminium knuckle using the stepped discs. Force went on the outer race, hub seated square, no brinelling. The spindles then pulled the old bearing out cleanly instead of me reaching for a slide hammer.

Payment and Security

PayPal

Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.

Estimer la livraison

You may also like

Recently Seen