Description
An axe is the oldest tool in the pack and the one most likely to be bought badly. Modern camp axes are usually either hatchets too light to split anything or felling axes too heavy to carry. This one sits in the gap that matters: 48 centimetres of usable length with enough head mass to split rounds, light enough to strap to a pack for a weekend and forget about until the fire needs wood.
The head is forged steel, heat-treated to hold an edge through knots and the occasional accidental contact with soil, and it is hung on a full-tang construction rather than a wedged eye that loosens with the seasons. The handle is a hardwood core with a textured grip zone, shaped so the hand can slide from a choked grip for kindling to a full swing for splitting. A lanyard hole at the butt takes a wrist loop, which is the single most useful safety feature on any axe and the one most often omitted.
The sheath is part of the tool, not packaging. Heavy-duty leather with a full-length welt means the edge cannot cut through the stitching in a pack, and the belt loop is positioned for cross-draw carry so the axe sits flat against the hip instead of swinging. Sharp, balanced, and sheathed properly, this is the tool that makes the difference between a fire that takes and a fire that does not.
Not a hatchet pretending to be an axe. A short, honest splitting tool that arrives sharp and stays that way.
Key Features
- ✦ Forged steel head, heat-treated for edge retention through knots
- ✦ Full-tang construction that will not loosen with seasonal wood movement
- ✦ 48 cm overall length - long enough to split, short enough to pack
- ✦ Hardwood handle with textured grip zone and choked-grip shaping
- ✦ Lanyard hole at the butt for a wrist loop
- ✦ Heavy-duty leather sheath with full-length welt and belt loop
- ✦ Balanced head-to-handle ratio for controlled splitting swings
- ✦ Multi-purpose profile suited to kindling, limbing, and camp craft
Technical Specifications
- Overall Length: Approximately 48 cm
- Head Material: Forged carbon steel, heat-treated
- Handle: Hardwood core with textured grip zone
- Construction: Full tang, riveted
- Head Weight: Approximately 900 g
- Total Weight: Approximately 1.3 kg with sheath
- Sheath: Leather with full-length welt, belt loop, cross-draw carry
- Edge Profile: Convex grind suited to chopping and splitting
- Intended Use: Camp firewood, kindling, limbing, trail maintenance
- Care: Oil the head after use, keep the edge dry, store in the sheath
Where It Belongs
It is a camp tool first: splitting rounds down to burnable size, making kindling from a damp log, clearing a limb that blocks a trail. It also earns its keep in a garden where branches need reducing to fit a bin, at a fire pit where the wood arrives in pieces too large to burn, and in a vehicle kit for the storm that drops a branch across a track. It is not a felling axe and should not be used as one - for anything over about fifteen centimetres in diameter, a proper felling axe and a trained hand are the correct tools.
Frequently Asked Questions
Q: Is it sharp out of the box?
A: It arrives with a working edge that will split and chop. Most users refine it once with a file or puck to suit their own preference - a convex edge holds up better on camp wood than a razor profile.
Q: What wood can it handle?
A: Rounds up to about fifteen centimetres in diameter split cleanly. Knotty hardwood takes more force and a sharper edge; seasoned oak is the practical upper limit for a tool this size.
Q: How do I maintain the head?
A: Wipe it dry after use and apply a thin film of oil - any mineral or camellia oil works. Rust is cosmetic on a forged head but it accelerates if the tool is stored damp in the sheath.
Q: Can I baton with it?
A: You can, but it is not the tool's purpose. Batoning puts lateral stress on the handle that a splitting swing does not. Use a dedicated knife for batoning and keep the axe for swings.
Q: Is the leather sheath safe for travel?
A: Yes, the full-length welt means the edge sits against leather rather than stitching. Ensure the axe is fully seated and the retention strap closed before it goes into a pack or vehicle.
Q: What is the warranty?
A: The head and handle carry a 12-month defect warranty covering forging faults and handle separation. Damage from striking stone, metal, or using the axe as a pry bar is not covered.
Customer Reviews
Payment and Security
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.