Description
A connection is only as honest as the metal that carries it. In the world of PCB prototyping, the difference between a clean build and a haunted one is often a single unreliable contact. The Terminal Foundry series — rising clamp screw terminal blocks at the industry-standard 2.54mm pitch — gives your boards the kind of mechanical and electrical integrity that separates serious hardware from hobbyist improvisation.
Each block uses a rising clamp mechanism that presses the stripped wire against the conductor with consistent, repeatable force. No solder, no cold joints, no intermittent ghosts. The tin-plated contacts hold firm through vibration, temperature cycling, and repeated rework — which is exactly what a development bench demands when a design is still evolving.
Available in 25 and 50 piece packs, the range covers the KF128-2.54, DG308-2.54, MPT0.5-2.54, and EK254V form factors that populate datasheets and reference designs across the industry. When your prototype works on the bench, the same terminals carry it into production without a redesign.
The engineer’s truest currency is time, and every moment spent fighting a loose connection is a moment stolen from the design itself. That is the argument at the heart of the Terminal Foundry: predictable, repeatable, mechanically sound termination as a baseline, not a luxury. The rising clamp design means the contact force is set by the screw geometry rather than by how hard you happen to pull the wire, which removes the human variable from the equation. For educators teaching the next generation of hardware engineers, it also means students learn good termination habits on parts that forgive — and correct — imperfect technique.
Solder your logic, not your patience.
Key Features
- ✦ Rising clamp mechanism for consistent, tool-free wire termination
- ✦ Standard 2.54mm pitch — drops into common PCB layouts and perfboards
- ✦ Tin-plated copper alloy contacts for low resistance and corrosion resistance
- ✦ CE and RoHS certified — production-grade materials throughout
- ✦ Supports stranded and solid wire up to the rated gauge with repeatable rework
- ✦ 25PCS and 50PCS pack options for prototyping and small-batch production
Technical Specifications
- TypeScrew terminal block (rising clamp)
- Pitch2.54mm
- Form FactorsKF128-2.54, DG308-2.54, MPT0.5-2.54, EK254V
- Wire TerminationScrew clamp, no soldering required
- CertificationCE, RoHS
- CustomizationYes (is_customized)
- OriginMainland China
Where It Fits
These terminals are the quiet workhorses of control panels, power supplies, sensor breakout boards, PLC I/O modules, LED driver boards, and educational electronics kits. They are equally at home on a university bench, in a repair technician’s kit, or in the production line of a small OEM — anywhere a wire must land on a board and stay there.
Frequently Asked Questions
Q: Do I need to solder these terminal blocks?
No. The rising clamp design secures stripped wires with a screw, so connections are made and remade without soldering — ideal for prototyping and field service.
Q: What wire gauge do they accept?
They accept standard 28-16 AWG stranded and solid wires typical of PCB work. When in doubt, strip 5-6mm and clamp firmly.
Q: Can I reuse a terminal after removing a wire?
Yes, the clamp is designed for repeated use. Retightening a terminal after rework is a normal part of the development cycle.
Q: Are these suitable for production boards?
Yes. CE and RoHS certification, consistent plating, and the standard 2.54mm pitch make them a direct drop-in for production designs, not just bench prototypes.
Q: What is the difference between the form factors listed?
KF128-2.54, DG308-2.54, MPT0.5-2.54, and EK254V are compatible 2.54mm rising clamp families with slightly different housing profiles — pick the one that matches your PCB footprint.
Q: Do these blocks accept ferrule-crimped wires?
Yes. Ferrules improve the connection on stranded wire and are fully compatible with the rising clamp mechanism, making it the preferred practice for industrial and field wiring.
Q: What torque should I use when tightening?
Tighten until the wire is firmly clamped with light resistance — typically a quarter turn past first contact for the wire gauges this block accepts. Over-tightening is not necessary; the clamp geometry does the work.
Q: How should I store unused blocks?
Keep them in a dry, static-safe container. The tin-plated contacts are corrosion-resistant, but standard electronics storage practices — away from humidity and aggressive chemicals — will keep them pristine for years.
Q: Do these blocks require any special tools?
No — a standard small screwdriver is all you need. The rising clamp accepts a flat-head or Philips driver and holds the wire firmly without crimping tools, which keeps field rework fast and simple.
The EastSupplier Promise
Every order ships from verified partner warehouses with tracking. If an item arrives damaged or fails to perform as described, contact our support team within 30 days for a replacement or refund. We back the products we put our name on, so you can buy with confidence.
Customer Reviews
Payment and Security
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.