Description
A blinder has one job: to make the room feel louder than it sounds. The Twin Eye Array does that with two COB emitters per fixture, one cool white and one warm white, blended across a dimming range that runs from full stage wash down to a whisper, which is what separates a usable blinder from a switch that only knows two states.
Each unit carries 200 watts of COB light source on an aluminium and iron body built to survive being rigged, struck and carried by a working crew. Dimming runs smoothly from 0 to 100 percent, the LED engines are rated for more than 60,000 hours, and the light output is listed from 2000 to 82000 lumens depending on the fixture configuration in the set. Control is flexible on purpose: sound activated for a DJ booth with no desk, master slave for a simple pair, self propelled for standalone use, and 8 channel DMX512 when the show is programmed from a console.
The set ships as four fixtures, which is enough to build a front line across a small stage, two per side of a DJ booth, or a chase effect across a back wall. Protection rating is IP20 for indoor use, power is AC 90 to 220 volts at 50 or 60 Hz, and the black cast aluminium shell keeps the weight manageable on a single stand. A menu, up, down and enter panel handles addressing and mode selection, with a screen saver that wakes on any key press.
Lighting does not make a room louder. It makes people behave as though it is.
Key Features
- ✦ Two COB emitters per fixture, cool white and warm white, blended across 0 to 100 percent dimming
- ✦ 200W per light with LED life rated above 60,000 hours
- ✦ Four control modes: DMX512, sound activated, master slave and self propelled
- ✦ 8 channel DMX addressing for console programming
- ✦ Four fixtures per set, enough for a front line or a two per side booth rig
- ✦ Aluminium and iron body in black with IP20 rating for indoor use
- ✦ AC 90 to 220V at 50 or 60 Hz with a menu driven display panel
Technical Specifications
- Model: 200W COB Par Light, U King
- Light Source: 2 pieces white plus warm white COB LEDs per fixture
- Power: 200W per fixture
- Luminous Flux: 2000 to 82000 lumens depending on configuration
- Control Modes: DMX512, sound activated, master slave, self propelled
- DMX Channels: 8 channels
- Dimming: 0 to 100 percent
- Voltage: AC 90 to 220V, 50 to 60 Hz
- Body: Cast aluminium shell with iron frame, black, IP20 for indoor use
- Set Contents: Four fixtures, LED life over 60,000 hours
Where It Fits
Mobile DJs use the sound activated mode for weddings and parties where nobody unpacks a console. Small venues rig two per side of a booth and run master slave. Bar and club operators programme the 8 channel DMX mode for defined looks across a fixed install. Bands carry four as a compact front wash that fits in the back of a van alongside the rest of the backline, which is the practical reason crews keep choosing par fixtures over larger moving heads.
Frequently Asked Questions
Q: Do I need a DMX console to use these?
A: No. Each fixture runs in sound activated, master slave or self propelled mode without any console at all. DMX512 becomes worthwhile when you want defined looks stored and recalled, and the fixture takes 8 channels for that.
Q: How bright is the light in practice?
A: Bright enough to front light a small stage or wash a back wall as a pair. The warm and cool white blending is what makes the light usable for skin tones rather than a flat white wash that photographs badly.
Q: Can I link the fixtures together?
A: Yes. Master slave mode lets the units run in a chain from one master, and DMX mode addresses each fixture individually. Standard DMX cabling between units is all the connection the chain needs.
Q: Are they suitable for outdoor use?
A: No. The rating is IP20, which means indoor use in a dry environment. Outdoor stages need fixtures rated for weather, and the listing states this clearly in the safety instructions.
Q: What is included in the set?
A: Four fixtures as a set. Power and signal cabling between units is standard DMX and IEC cable, which most working rigs already carry. A grounded power outlet is required for each run of fixtures.
Q: How should they be maintained?
A: Keep at least 50 centimetres of clearance around the vents, keep them out of rain and moisture, and disconnect power before any service work. The aluminium body is designed to dissipate heat, so blocking airflow shortens LED life more than long running hours do.
Customer Reviews
Payment and Security
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.