The Bulwark | Inflatable Ribbed Boat Fender Kit with Pump and Lines

Risparmia 20%
East Supplier PlatformSKU:1005008155580084-5.5in-United States

Color: 5.5in
Prezzo:
$155.28 $194.10

Tasse incluse spese di spedizione calcolata al pagamento

Disponibilità:
Disponibile

Descrizione

A dock is a negotiation between two hard things and one soft one. Timber piling, concrete edge, steel hull — and whatever you hang between them decides whether the meeting is a conversation or a collision.

These ribbed fenders are built around a simple admission: the failure mode of an inflatable fender is almost never the impact, it is the seam. A 3.8 mm PVC wall with moulded ribs spreads point loads along the length of the body instead of concentrating them at one contact patch, and the rib profile keeps the fender from rolling out from under a hull that is still moving against it. The rope eyes are reinforced, because a fender that tears free at the eyelet is worse than no fender — it leaves the hull bare and puts loose PVC in the water.

The kit is deliberately complete. Four polypropylene ropes, four inflation needles, a pump sized to the job, and an Oxford cloth storage bag with a mesh panel so the fenders dry instead of mildewing in a locker over winter. Sizing follows hull length rather than guesswork: 5.5 inch for boats to 16 feet, 6.5 inch for 16 to 26 feet, 8.5 inch for 26 to 36 feet. The fender also doubles as a warning buoy, which is why the black finish and the centre holes exist — a fender that reads clearly at distance is doing two jobs at once.

The hull does not remember the calm days. It remembers the one afternoon you left the dock short-handed.

Key Features

  • ✦ 3.8 mm PVC wall with moulded ribs that spread impact instead of concentrating it.
  • ✦ Reinforced rope eyes built for the polypropylene lines supplied in the kit.
  • ✦ UV and heat stabilised compound that resists cracking and ageing in permanent sun.
  • ✦ Centre-hole design lets the fender double as a marine warning buoy.
  • ✦ Supplied with pump, four needles, four ropes and a breathable Oxford storage bag.
  • ✦ Three sizes matched to hull length from 16 to 36 feet.
  • ✦ Deflates flat for locker storage and re-inflates without specialist tooling.

Technical Specifications

  • Material: High-grade PVC, 3.8 mm wall thickness
  • Shape: Ribbed cylindrical fender with centre holes
  • Sizes: 5.5 in, 6.5 in and 8.5 in diameter
  • Hull Match: Up to 16 ft, 16 to 26 ft, 26 to 36 ft
  • Rope: Four polypropylene lines, high tensile, wear resistant
  • Inflation: Hand pump plus four needles included
  • Storage: Oxford cloth and mesh bag, breathable
  • Colour: Black
  • Certification: KR
  • Use: Docking, rafting, dock protection, warning buoy
  • Origin: Mainland China

Where It Belongs

Pontoon berths, marina slips, canal moorings and trailer launches are the obvious settings, but the same fender earns its place on tenders and dinghies dragged alongside a larger mother ship, and on floating docks where the edge takes punishment from visiting boats. Sailors who moor stern-to in Mediterranean marinas tend to keep two oversized fenders on the quarters, and the 8.5 inch body is the right answer there. Because the fender is inflatable, it can be deflated and stored under a bench seat for the winter instead of occupying a locker slot all year.

Frequently Asked Questions

Q: How much air pressure should the fender hold?

Inflate until the body is firm to a thumb press but still yields slightly, typically around 2 to 3 psi. Over-inflation splits seams and removes the cushioning that makes the fender useful. Under-inflation lets the fender flatten and roll out from under the hull.

Q: Which size do I need for a 22 foot boat?

The 6.5 inch fender covers 16 to 26 feet. If you moor in an exposed berth or alongside a concrete wall, step up to the 8.5 inch for the two aft positions.

Q: Can the fenders stay in the water permanently?

They can stay rigged through the season. The PVC compound is UV stabilised, but for permanent moorings it is still worth pulling them for a fresh water rinse at mid-season to clear salt and algae from the rib channels.

Q: Do the ropes come with the fenders?

Yes. Four polypropylene ropes ship in the kit, along with four inflation needles, a pump and a storage bag. Line does not need to be bought separately.

Q: Will these work as a buoy?

Yes. The centre holes allow a line to pass through and the black body reads clearly at distance, which is why they are often used as warning buoys around moorings and swim areas.

Q: What if a fender loses pressure overnight?

Check the valve seat first, since a needle pushed too far can leave the valve slightly open. Reseat the valve, re-inflate, and if pressure still drops, submerge the fender to trace the leak along a seam.

Customer Reviews

Customer Reviews

Based on 3 reviews
67%
(2)
33%
(1)
0%
(0)
0%
(0)
0%
(0)
N
Nerys K.
Solid fenders, mind the pressure

Very well made and the 3.8mm wall feels substantial compared to the thin ones at the chandlery. Four stars because I over-inflated one on the first go and it bulged at the seam. Let some air out and it has been fine since - keep them soft, around 2 to 3 psi.

L
Linnea V.
The complete kit is genuinely complete

Pump, four needles, four ropes, storage bag. I did not have to buy a single extra item, which is unusual. Deflated them for winter storage and they folded flat under the bench seat. 6.5 inch is right for our 22 footer.

G
Gareth J.
Held up alongside a concrete wall all season

Moor stern-to against a concrete quay and these have taken the punishment without a mark or a soft spot. The ribs are what sold me - the fender does not roll out from under the hull when the boat moves against it, which was the exact problem with the smooth ones I had before.

Payment and Security

PayPal

Le tue informazioni di pagamento vengono elaborate in modo sicuro. Non memorizziamo i dettagli della carta di credito né abbiamo accesso alle informazioni della tua carta di credito.

Previsione di spedizione

You may also like

Recently Seen