Descrizione
Everything in a pickup tray is fine until the first roundabout. The Load Anchor exists to answer that one specific problem: how to stop a load from becoming a projectile without drilling, welding or bolting anything to the body. It is a thickened steel rod with spring-loaded elastic ends that press against the sides of the tray, clamping whatever sits between them and holding it exactly where you put it.
The rod adjusts from 1.3 to 1.7 metres, which covers the width of the common double-cab tray, and the spring handle lets you compress it with one hand and seat it in seconds. Because it relies on outward pressure rather than fixing points, it can be repositioned anywhere along the bed and removed entirely when you need the full length of the tray. The limiting bracket that ships with the limiter option is a painted steel stop that keeps smaller items from sliding forward into the cab end.
The finish is deliberately plain: painted steel, corrosion resistant, black, built to be thrown in and out of a working vehicle for years rather than admired. This is not a styling accessory. It is the piece of hardware that stops a toolbox, a jerry can or a stack of timber from rearranging itself at speed.
A load that cannot shift is a load you stop worrying about.
Key Features
- ✦ Spring-loaded elastic ends grip the tray sides without drilling or welding
- ✦ Adjustable length from 1.3 to 1.7 metres to suit common double-cab trays
- ✦ Thickened steel pipe construction with corrosion resistant painted finish
- ✦ One-hand spring handle for fast fitting and removal
- ✦ Repositionable anywhere along the bed and removable when not needed
- ✦ Limiter option includes a painted steel stop bracket for smaller items
- ✦ Designed for universal pickup trays including the Mitsubishi Triton L200
Technical Specifications
- Product Type: Pickup tray cargo stabilizer rod with limiter bracket
- Material: Thickened steel pipe, painted
- Colour: Black
- Adjustable Length: 1.3 to 1.7 metres (4.3 to 5.6 feet)
- Fixing Method: Spring-loaded elastic pressure ends, no drilling
- Handle: Spring handle for one-hand operation
- Limiter Material: Thickened steel, painted
- Placement: Rear cargo tray, position adjustable
- Applicable Models: Universal pickup, including Mitsubishi Triton L200
- Packaging: Support bar alone, or support bar plus limiter
- Certification: CE
- Origin: Mainland China
Where It Belongs
It earns its place in any working pickup. Tradies use it to pin down toolboxes, ladders and material offcuts so nothing slides into the tailgate on the way to site. Campers use it to hold fridge slides, water containers and firewood in place on corrugated tracks. Farmers use it to stop sacks and drums from migrating across the tray between gates. Because it needs no permanent mounting, it also suits leased vehicles and hire utes where drilling a hole is simply not an option.
Frequently Asked Questions
Q: Will it fit my tray without drilling?
A: Yes. The rod grips by pressing outward against the tray walls using its spring-loaded ends, so there is no drilling, welding or bolting involved. If tray dimensions differ from the standard range you may need the limiter bracket to take up slack.
Q: What length does it cover?
A: It adjusts continuously from 1.3 metres to 1.7 metres, which covers most double-cab and many single-cab trays. Measure the internal width of your tray at the point you intend to fit it.
Q: What is the limiter actually for?
A: The limiter is a separate steel bracket that acts as a forward stop for small or light items the rod itself cannot clamp. Add it if you carry loose items that could slide past the rod.
Q: Will it damage the paint on the tray?
A: The ends are elastic and press evenly rather than digging in, so paint marking is minimal. As with any pressure-fit accessory, keeping the contact points clean avoids grit becoming an abrasive.
Q: Does it suit the Mitsubishi Triton L200 specifically?
A: It is a universal-fit product that is commonly used on the Triton L200 and similar pickup trays. Confirm the internal tray width falls inside the 1.3 to 1.7 metre range before ordering.
Q: How much load can the rod hold back?
A: It is a stabiliser rather than a certified restraint. Its job is to stop tools, drums, timber and boxes from shifting and colliding, not to serve as a load-bearing tie-down for road transport. Use rated straps for anything that must be legally secured.
Q: Will it work in a tray fitted with a liner?
A: Yes. The elastic ends contact the tray walls, so a plastic or rubber liner is not a problem as long as the surface is reasonably sound. Avoid fitting it directly onto a soft or loose liner edge where the pressure point could tear.
Q: How should I store it when it is not in use?
A: Because it is a single steel rod with no separate brackets required, it stores flat along the side of the tray or in a shed. The spring handle releases with one hand, so it takes only a few seconds to remove and refit.
Customer Reviews
Payment and Security
Le tue informazioni di pagamento vengono elaborate in modo sicuro. Non memorizziamo i dettagli della carta di credito né abbiamo accesso alle informazioni della tua carta di credito.