Descrizione
Pressure is only dangerous when nobody is measuring it. Everything that makes a high-pressure compressor useful also makes it unforgiving: the same 300 bar that fills a cylinder in minutes will not tolerate a gauge that drifts or a cut-off that hesitates. The Pressure Vault was designed around that single principle, which is why its controls are digital rather than analogue.
Inside the housing sits a two-stage reciprocating pump driven by a 300W copper motor and cooled by forced air. Two stages matter because compressing straight to 4500PSI in one pass generates heat that shortens seal life and carries moisture into the tank. Splitting the work across stages lowers the temperature at each piston, which is the difference between a compressor that lasts a season and one that lasts a decade. The built-in power adapter accepts 12V, 110V and 220V input, so the same unit works from a vehicle circuit on site and from a wall socket at home.
The digital control panel is where the operator stops watching and starts trusting. A target pressure is dialled in and the unit fills to it, reads it out live, and stops there. No leaning over a needle gauge, no over-filling, no venting an expensive fill back into the air because the shut-off came late. A lubricated or sealed application that lives on repeatable pressure has exactly one requirement of its equipment, and this is it.
It does not simply add pressure. It decides how much, and it holds that decision.
Key Features
- ✦ 300 bar / 4500PSI / 30MPa working pressure from a two-stage reciprocating pump
- ✦ 300W copper motor with forced-air cooling for extended fill sessions
- ✦ Digital LCD control with live pressure readout and set-pressure shut-off
- ✦ Built-in power adapter accepting 12V, 110V and 220V input
- ✦ Two-stage compression for lower running temperature and longer seal life
- ✦ Compact booster-pump structure that sits on a bench or in a vehicle boot
- ✦ Country-specific voltage variants for UK, EU, US and Brazilian supply
Technical Specifications
- Model: TUXING TXET063
- Pump structure: Two-stage reciprocating booster pump
- Working pressure: 300 bar / 4500 PSI / 30 MPa
- Motor: 300W copper motor, electric drive
- Cooling: Fan cooled
- Input voltage: 12V / 110V / 220V (variant specific)
- Control: Digital LCD display with set-pressure automatic cut-off
- Power adapter: Built-in
- Voltage variants: 110V CHINA, 220V CHINA, Italy, Spain, Czech Republic, Brazil, United Kingdom
- Certification: CE
- Declared chemicals: None classified as high-concern
This is workshop equipment, and it belongs in the places where compressed air is a consumable rather than a convenience. Dive and paintball operators filling cylinders between sessions, airgun shooters who want a consistent fill at home rather than a trip to a shop, and small service businesses that fill for customers all depend on the same thing: the pressure on the label has to be the pressure in the cylinder. The unit's compact booster layout means it also works as mobile equipment, running from a 12V circuit in the field and from mains power back at base.
Frequently Asked Questions
Q: What does set-pressure control change in practice?
It converts filling from an act of attention into a routine. The target is entered once, the pump runs to that figure and stops on its own, and the operator is free to do something else in the meantime. Late shut-off and the over-pressure that follows are removed as a class of error.
Q: Why two stages instead of one?
Compressing air in a single pass to 4500PSI produces far more heat, and heat is what attacks seals and drives moisture into the output. Splitting the compression into two stages lets the air cool between them, which protects the internals and produces a drier fill.
Q: Which voltage should I order?
Match the variant to your wall supply: 110V for North American circuits, 220V for most of Europe, the United Kingdom, the Czech Republic and Brazil. The same unit also accepts 12V, so it can run from a vehicle electrical system away from mains power.
Q: Is it portable enough to move around?
Yes. The booster-pump structure keeps the footprint modest, which is why the unit is normally kept on a bench, in a workshop cabinet or in the boot of a vehicle rather than fixed in place.
Q: What maintenance does it need?
Keep the cooling path clear so forced-air cooling works, check fittings for leaks at the start of a session, and avoid running longer than the duty cycle the pump is designed for. A unit that runs cool lasts far longer than one that is asked to fill continuously.
Q: Does it ship from Europe?
EU-facing voltage variants and the UK variant are stocked for local dispatch where available, which keeps delivery times short and avoids customs delays on a heavy item.
Q: Can it be used with a standard 12V vehicle supply?
Yes, the built-in adapter accepts 12V input, which is the practical option when filling on site away from a wall socket.
The EastSupplier Promise
Every unit is inspected before it leaves the warehouse. If a specification on this page does not match what arrives, we cover the return shipping and replace it. English-language support answers within one business day, and replacement parts for this category are stocked so a working unit stays working.
Customer Reviews
Payment and Security
Le tue informazioni di pagamento vengono elaborate in modo sicuro. Non memorizziamo i dettagli della carta di credito né abbiamo accesso alle informazioni della tua carta di credito.