Descrizione
A studio is not a room. It is a set of conditions — height, stability, light, and the quiet confidence that nothing will move when the shutter does. The Skyline Studio tripod was built to deliver those conditions on demand, whether you are framing a portrait in a rented studio, suspending a softbox over a product table, or locking a projector into a perfect rectangle on a conference wall.
Its air-pressure column extends to 280cm in a single smooth glide, held by a stainless-steel chassis that carries up to 10kg without sway. The cross-interface 1/4-inch and 3/8-inch screw head accepts cameras, ring lights, phone mounts, and flash brackets alike, while the buffer-spring protection absorbs the shock of setup and teardown so your gear is never asked to forgive a careless drop. Folded, it compresses to 93cm — a silhouette that slips into a gear bag as if it were never there.
Photographers measure a tool by the difference between intention and outcome. With the Skyline Studio, that distance collapses to almost nothing: extend, lock, compose, shoot. The stand disappears into the frame, and only your work remains.
This is not a tripod. It is a fixed point in a moving world.
Key Features
- ✦ Air-pressure telescopic column extends to 280cm, adjustable in seconds without cranking
- ✦ 10kg load rating in 100% stainless steel — stable under softboxes, projectors, and full-frame rigs
- ✦ Dual 1/4-inch and 3/8-inch cross-interface head fits cameras, ring lights, phones, and flash mounts
- ✦ Buffer-spring protection cushions every extension and fold, protecting both stand and gear
- ✦ Folds to 93cm with a 2.23kg travel weight — studio rigidity, road-trip portability
Technical Specifications
- Maximum Height: 280cm (telescopic, air-pressure)
- Folded Length: 93cm
- Load Capacity: 10kg
- Material: 100% stainless steel
- Weight: 2.23kg
- Mount Interface: 1/4-inch and 3/8-inch cross-interface screw head (international standard)
- Compatibility: Cameras, photographic lighting, softboxes, ring lights, projectors, flash stands, phones
- Protection: Buffer-spring dampening on column extension
Application Scenarios
In a photography studio, the Skyline Studio becomes the backbone of portrait and product work, holding a softbox at ceiling height while a second unit stands ready with a ring light for beauty shots. For videographers, it locks a phone or mirrorless body into a stable platform for overhead content, b-roll, and live streams. On location, the same column supports a projector for outdoor cinema nights or a portable flash for event coverage. Workshop teams use it as a camera mast for process documentation, and educators rely on it to hold displays at eye level in classrooms and demo rooms. Wherever a precise, repeatable vantage point matters, the Skyline Studio provides it.
Frequently Asked Questions
Q: Will this tripod hold a DSLR with a heavy lens?
A: Yes. The 10kg load capacity comfortably supports full-frame camera bodies, telephoto lenses, and studio flash heads. The stainless-steel column and cross-interface head keep everything locked and level.
Q: Does it work with a ring light or softbox?
A: Absolutely. The 1/4-inch and 3/8-inch screw head is the international standard used by ring lights, softboxes, flash brackets, and phone mounts — no adapter needed.
Q: How tall is it when fully extended?
A: The air-pressure column extends to 280cm (approximately 9.2 feet), with a folded length of just 93cm for storage and travel.
Q: Is the tripod portable?
A: At 2.23kg and 93cm folded, it fits into standard gear bags and overhead compartments — studio stability without the studio van.
Q: Is assembly required?
A: No. The tripod arrives ready to use. Extend the air-pressure column, set the head to your device, and lock the buffer-spring mechanism.
The air-pressure column is where the Skyline Studio proves itself in daily use. Unlike crank stands that announce every centimeter of extension with grating metal, this column rises in one fluid motion and locks at any height with a single control, so a two-minute height change between a tabletop macro shoot and a full-length portrait setup takes seconds instead of a production pause. The buffer-spring mechanism also means the stand lowers gently under load — no sudden drops, no startled talent, no gear that has to apologize.
Q: Can it support a projector for outdoor use?
A: Yes. With a 10kg load capacity and a standard 1/4-inch or 3/8-inch mount, the tripod holds projectors, screens, and lighting panels securely on patios, in yards, and at event venues.
Q: How stable is it at full extension?
A: The stainless-steel legs and wide stance keep the column steady at 280cm. For outdoor shoots in wind, the included spread stance and the stand's 2.23kg mass provide ample resistance to tipping.
Q: What is the warranty coverage?
A: Every EastSupplier product is covered by our 30-day return policy and quality guarantee. If the tripod arrives damaged or develops a defect in normal use, our support team will replace it promptly.
Customer Reviews
Payment and Security
Le tue informazioni di pagamento vengono elaborate in modo sicuro. Non memorizziamo i dettagli della carta di credito né abbiamo accesso alle informazioni della tua carta di credito.