All Cars Full System Diagnostic Lifetime Free

The Diagnostics application enables a data link to the electronic control system of the test vehicle for vehicle diagnosis.The application performs functional tests,retrieves vehicle diagnostic information such as trouble and event codes and live data for various vehicle control systems, such as ABS,SRS,Engine,Transmission,Brake System,Emission System,Fuel system,Light system,Wiper System etc.

1.Oil Lamp Reset Service:

allows you to perform reset for a new calculation of Engine Oil Life system once changed the oil.

2.SAS service:

helps clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration.

3.BAT battery service:

allows the scan tool to evaluate the battery charge state,monitor the close-circuit current, register the battery replacement,and activate the rest state of the vehicle.

4.DPF service:

specially works for Diesel Particulate Filter system with DPF regeneration,DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.

5.EPB service:

it is important in the maintenance of electronic braking system's safety and efficiency.

6.TPMS service:

makes sense in displaying sensor IDs from the vehicle's ECU,inputting TPMS sensor replacement IDs and testing sensors.

7.IMMO Key Programming:

the unique car key programming and read pin code function,it is mainly used to disable the lost vehicle keys and program a new replacement key fob.

8.ABS Bleeding:

ABS brake bleeding to get a firm brake pad after air exhaustion after repair ABS pump system.

9.Sunroof Reset:

The sunroof memory generally needs to be reset when the vehicle’s battery is replaced or the car dies.

10.Suspension Reset:

Try reset electronic suspension air ride with the massage system close all doors koeo flip through measage system go to suspension reset or on off.

11.Gearbox Reset:

Procedure Reset Transmission Adaptive Learning DIY. Start the car and drive.Once you perform this procedure the Engine Control Unit (ECU) and Transmission Control Unit (TCU) will work together to learn how you drive by monitoring your driving pattern.After you follow this programing method of the TCU/ECU drive the car.

12.AFS Headlamp Reset:

'AFS' means Adaptive Front lighting System(at night with the Bi-Xenon headlights) it swivels either side,pressing that button means they stay pointing straight ahead and don't turn when you turn the steering wheel.

13.Injector Coding:

Leaking injectors and some dead injectors can be missed even when an injector is disabled. Other problems with the ignition system and mechanical components also may not show an rpm loss when an injector is turned off.

14.Throttle Adaptation

The throttle body is a tube containing a pivoting flat valve (butterfly) that is used to control the amount of air entering an engine.In an electronically fuel injected car,a throttle position sensor and air flow sensor communicate with the computer,which supplies the corresponding amount of fuel needed at the injectors.It must need re-learning throttle sensor position after clearing or repair

15.Gear Learning:

The scan tool monitors certain camshaft position sensors signals to determine if all conditions are met to continue with the procedure for Engine running

Lifetime free All 10 Mode OBDII/EOBD Functions
Mode 1:Read live data stream
Mode 2:Read freeze frame data
Mode 3:Read DTCs(diagnostic trouble codes)
Mode 4:Clear dtcs
Mode 5:Oxygen sensor monitoring
Mode 6:System monitoring
Mode 7:Read pending DTCs
Mode 8:Control operation of on-board system
Mode 9:Read vehicle information
Mode 10:Request emissions-related diagnostic trouble codes with permanent status after a clear/reset emission-related diagnostic information.

Support Vehicles Diagnostic Report

1.Generate diagnostic report in MUCAR APP
2.Download the diagnosis report and transfer it to the computer to print the diagnosis report
3.Share your diagnosis report with your partner or car owner

How to use MUCAR BT200 Pro?

1.Download and install the APK ”MUCAR” in Google Play or your smartphone and sign up for a new account And log in.
2.Activate the device in APK ”MUCAR”,binding serial number;
3.Plug the MUCAR BT200 Pro dongle into the vehicle’s 16pin OBD2 Data Link Connector and then turn on your vehicle.
4.Tap Me/Setting button of your device to bluetooth pair the MUCAR BT200 Pro with your device.
5.Start to diagnostic your car.

Package:

1*BT200 OBDII Connector / 1*BT200 Pro OBDII Connector

1*Storage Bag
1*Manual