説明
Setting base engine timing on a 2.8 litre common rail diesel is not a job you improvise. The camshaft and crankshaft have to be locked in a known position while the belt or chain goes back on, and if either end drifts by a tooth the engine either refuses to start or starts badly enough to hide the fault until it becomes expensive. Factory tooling exists for exactly this reason, and it is priced accordingly. These kits are the working alternative.
This set is machined for the VM Motori family of 2.8 CRD engines found in Jeep Cherokee, Jeep Wrangler, Chrysler Grand Voyager, Dodge Nitro and the Holden Colorado and Trailblazer. The pieces cross-reference the OEM tool numbers VM 9991, VM 9992, EN-50029, EN-50030, EN-51025 and EN-51104, so a technician working from a service manual can match each function to the documented step rather than guessing. One tool locks the reluctor at the crank, another bolts to the cylinder head face to hold the camshaft, and the pump locking piece fits over the sprocket teeth to hold it while the retaining nut is broken loose or torqued.
What separates a usable kit from a frustrating one is fit tolerance. A locking pin that is two tenths loose will let the crank creep under belt tension, and you end up re-timing the engine a second time. These are machined to seat firmly in the locating features without hammering, which is why they hold position through the full torque sequence. For an independent workshop that sees a handful of these engines a year, the kit pays for itself on the first belt job it saves from a comeback.
Timing is not a setting you adjust. It is a position you either hold exactly or lose.
What Makes It Different
- ✦ Camshaft and crankshaft locking tools for 2.8L CRD VM Motori diesel engines
- ✦ Cross-references OEM numbers VM 9991, VM 9992, EN-50029, EN-50030, EN-51025, EN-51104
- ✦ Includes the EN-51104 style pump locking tool that engages the sprocket teeth
- ✦ Covers Jeep Cherokee, Wrangler, Chrysler Grand Voyager, Dodge Nitro, Holden Colorado
- ✦ Machined locating features seat firmly to prevent creep under belt tension
- ✦ 3, 4 and 5 piece kit configurations for different service scopes
- ✦ Supplied as a matched set so every locking point is covered in one pass
Technical Specifications
- Application: 2.8L CRD common rail diesel, VM Motori engine family
- Engine Codes: VM64C, ENS, 49C, 50C, VM10D, VM11D, LWN, LWH (Duramax)
- OEM Equivalent Numbers: VM 9991, VM 9992, EN-50029, EN-50030, EN-51025, EN-51104
- Vehicle Fitment: Jeep Cherokee 2008-2011, Jeep Wrangler 2007 onward, Chrysler Grand Voyager 2008 onward, Dodge Nitro 2007-2010, Holden Colorado 2012 onward, Trailblazer
- Function: Locks camshaft and crankshaft in position during timing belt or chain service
- Pump Tool: Reluctor lock and sprocket locking tool for retaining nut removal
- Construction: Hardened steel with machined locating pins
- Kit Options: 3 piece, 4 piece and 5 piece sets
- Storage: Supplied as a matched set for a single service
- Intended User: Professional technicians and experienced engine builders
Where It Belongs
Independent workshops use it for timing belt replacement, water pump access and cylinder head work on the VM 2.8 diesel. Fleet maintainers running Colorado and Trailblazer units keep a kit on the shelf because the alternative is waiting on a factory tool order while a vehicle occupies a bay. Engine rebuilders use the camshaft lock as a reference point during assembly, and mobile mechanics carry the compact variants because the whole set fits in a single case.
Questions Buyers Ask
Q: Which engines does this kit fit?
A: It is built for the VM Motori 2.8L CRD diesel family, covering engine codes VM64C, ENS, 49C, 50C, VM10D, VM11D, LWN and LWH as used in Jeep, Chrysler, Dodge and Holden applications. Confirm your engine code against the list before ordering.
Q: Are these genuine OEM tools?
A: No. They are aftermarket equivalents that cross-reference the OEM part numbers VM 9991, VM 9992, EN-50029, EN-50030, EN-51025 and EN-51104, so you can match each piece to the factory service procedure.
Q: Is 3 pieces enough or do I need 5?
A: Three pieces cover camshaft lock, crankshaft lock and pump sprocket retention, which handles a standard belt service. The larger sets add the extra locating pins used when the pump or head comes off.
Q: Can I use it without a service manual?
A: You can, but you should not. The kit holds positions the manual tells you to set. Download the procedure for your engine code and follow the torque sequence with the tools in place.
Q: Will it fit a 3.0L diesel?
A: No. This kit is specific to the 2.8L VM family. Using a locking tool from the wrong engine family can seat loosely and allow the crank to move.
Q: How is it packaged?
A: As a matched set in the piece count you select. Check each piece against the listing images and the OEM number list when it arrives, before the vehicle goes on the lift.








Customer Reviews
Payment and Security
お支払い情報は安全に処理されます。 クレジットカードの詳細を保存したり、クレジットカード情報にアクセスすることはありません
