The Cold Dock | Qi2 Magnetic Car Charger with Active Cooling for iPhone

20%セーブ
EastSupplier PlatformSKU: 1005008664508305-qi2

Color: qi2
価格:
$73.14 $91.42

税込み 送料計算済み チェックアウト時

在庫:
在庫あり

説明

Wireless charging in a car fails for two reasons that have nothing to do with convenience. The phone gets hot, and the mount lets go. A vent clip that grips with a spring arm will drop a 240 gram phone on the first cold morning, and a charger pressed against a warm battery loses efficiency exactly when the phone is working hardest, which in a car means navigation, streaming and a hotspot at the same time. This mount attacks both problems at the mount itself.

The magnetic ring is Qi2 certified, which means the alignment is fixed by magnets rather than by where the phone happens to land on a pad. Fixed alignment keeps the coil centered, and a centered coil is what makes 15W actually arrive instead of degrading into a trickle. Behind the contact face sits a semiconductor cooling plate and a small internal fan. The plate pulls heat off the phone's back panel while the fan moves it out of the housing, so a phone running maps in summer does not throttle its own charge rate. The contact face is mirrored, which sounds cosmetic until you own one: it glides against the phone back rather than grinding grit into the finish.

Mounting is the part most chargers get lazy about. The arm terminates in an adjustable steel hook that seats onto the vent louvres and can be tuned to the width of the vent, and a solid ball joint at the center of the assembly gives a full 360 degrees of rotation so the screen can be turned to face the driver or the passenger. Telescoping body extends the phone forward of the dashboard when the vent sits deep in the console. Nothing here needs a 3M pad glued to the leather.

A mount that drops the phone is not a mount. A charger that overheats the battery is not charging it.


What Makes It Different

  • ✦ Qi2 certified magnetic alignment for a centered 15W coil position
  • ✦ Semiconductor cooling plate plus internal fan to counter charge heat
  • ✦ Mirrored contact surface that protects the phone back from abrasion
  • ✦ Adjustable steel vent hook that tunes to the width of the louvres
  • ✦ Solid ball joint with 360 degree rotation for driver or passenger view
  • ✦ Telescoping body to clear deep dashboards and center consoles
  • ✦ Supports 15W, 10W, 7.5W and 5W charge tiers across MagSafe iPhone models

Technical Specifications

  • Certification: Qi2, CE, RoHS
  • Max Output: 15W wireless (15W / 10W / 7.5W / 5W tiers)
  • Cooling: Semiconductor cooling chip with internal fan
  • Mount Type: Adjustable steel vent hook with telescoping arm
  • Rotation: 360 degree ball joint
  • Connector: USB Type C input
  • Input Requirement: 18W QC 3.0 car charger adapter, not included
  • Compatible Devices: MagSafe iPhone 12 through 16 series, other Qi2 handsets
  • Contact Surface: Mirrored finish over cooling plate
  • Package Contents: One magnetic car charger mount, cable per option

Where It Belongs

Ride share and delivery drivers are the obvious users, because a phone in constant navigation needs to hold charge rather than merely slow its drain. Daily commuters get the benefit on long summer drives where a plain vent mount cooks the battery by the time the trip ends. Anyone who has watched a spring clip surrender on a bumpy road will recognise the steel hook design as the fix, and the 360 degree joint means the same mount works whether the vent sits left of the wheel or in the center stack.

Questions Buyers Ask

Q: What is the difference between Qi2 and standard Qi?

A: Qi2 uses magnets to fix the coil alignment, so the phone cannot sit half an inch off center. Fixed alignment is what allows the full 15W to arrive instead of a lower trickle rate.

Q: Does it really cool the phone?

A: Yes. A semiconductor plate sits behind the contact face and an internal fan exhausts the heat. On a long navigation run this keeps the phone from throttling its own charge, which is the usual reason car wireless charging feels slow.

Q: Do I need a special adapter?

A: You need an 18W QC 3.0 car charger adapter as the power source, and that adapter is not included. A standard 5W USB port will make the mount work slowly rather than not at all.

Q: Will it hold a phone in a thick case?

A: MagSafe-compatible cases hold firmly. Very thick rugged cases without a magnetic ring will weaken the grip, so use a magnet-equipped case for the full hold.

Q: Does it fit round or vertical vents?

A: The steel hook is adjustable, so it seats onto horizontal, vertical and round louvres. Very thin or decorative vent blades can be too narrow for the hook to seat against.

Q: Can the phone be turned sideways?

A: Yes. The ball joint rotates a full 360 degrees, so landscape for maps and portrait for calls both work without removing the phone.

Customer Reviews

Customer Reviews

Based on 3 reviews
67%
(2)
33%
(1)
0%
(0)
0%
(0)
0%
(0)
D
Delphine H.
The mirrored face does not grind grit into the case

Swapped from a plastic pad mount that scuffed the back of my phone. The contact surface glides, the Qi2 magnets snap the coil into one position, and the ball joint turns far enough for the passenger to read the screen.

C
Corin X.
Vent hook needed adjusting, then held

My louvres are vertical and thin, so the steel hook took a couple of attempts to seat. Once tuned it has not slipped. Remember the 18W QC adapter is not in the box, and a plain USB port will not give you the full rate.

B
Bettina X.
The phone stayed cool on a two hour drive

Maps, streaming and a hotspot at once usually cooks the phone and the charge rate collapses. With the cooling plate running the phone was warm rather than hot at the end, and the battery percentage went up instead of down.

Payment and Security

PayPal

お支払い情報は安全に処理されます。 クレジットカードの詳細を保存したり、クレジットカード情報にアクセスすることはありません

発送予定

You may also like

Recently Seen