The Filament Standard | 1.75mm PLA for FDM Printing, 1kg Spool

20%セーブ
EastSupplier PlatformSKU: 1005008294792494-Transparent-GERMANY

Color: Transparent
価格:
$52.30 $65.38

税込み 送料計算済み チェックアウト時

在庫:
在庫あり

説明

Every failed print has a story, and most of those stories are about the material rather than the machine. A nozzle that is perfectly trammed, a bed that is perfectly leveled, a slicer profile tuned over a week, and still a part warps at the fourth layer or snaps along a seam. The variable nobody wants to suspect is the filament, which is precisely why it deserves to be specified.

This is Geeetech PLA wound to a 1.75mm nominal diameter with a tolerance held to plus or minus 0.03mm across a full kilogram spool. That tolerance is the quiet engineering: at 0.03mm the extruder sees a consistent bite, flow estimates stay honest, and wall thickness stops drifting between the first and last third of a print. PLA itself is the sensible default material, non-toxic, low-shrinkage and dimensionally calm, with enough rigidity for brackets, jigs, enclosures and display pieces.

The spool runs on the temperature band most FDM printers already know: 190-210C at the nozzle, 20-60C on the bed, 50-100mm/s on travel. It ships sealed, which matters more than the spec sheet suggests, because moisture is what turns a good spool into a stringing spool three weeks later. Store it dry, print it cool, and the printer stops being the suspect.

A printer is only as repeatable as the material you feed it. Everything else is tuning.


Key Features

  • ✦1.75mm diameter held to plus or minus 0.03mm for consistent extrusion from the first layer to the last.
  • ✦Full 1kg net spool on a rigid reel, roughly 300-330 meters of usable filament.
  • ✦Low-shrinkage PLA that holds dimensions on brackets, enclosures, jigs, and display models.
  • ✦Runs at 190-210C nozzle and 20-60C bed, inside the default profile of nearly every FDM printer.
  • ✦Sealed packaging keeps moisture out until the first print, which is where most stringing begins.
  • ✦Grade options including transparent, marble, color gradient, and silk-effect blends for finish work.
  • ✦Non-toxic, biodegradable base polymer that prints without the fumes of ABS or ASA.

Technical Specifications

  • Material: PLA (polylactic acid), solid form
  • Diameter: 1.75mm, tolerance plus or minus 0.03mm
  • Net weight: 1kg per spool including reel
  • Gross weight: 1.4kg
  • Nozzle temperature: 190-210C standard, 200-230C for silk blends
  • Bed temperature: 20-60C standard, 40-60C for silk blends
  • Print speed: 50-100mm/s standard, 30-60mm/s for silk blends
  • Shrinkage: Low, with high dimensional stability
  • Compatibility: Standard 1.75mm FDM printers and most enclosed multi-material systems
  • Storage: Sealed and dry, reseal with desiccant between spools

Where It Belongs

This is a working spool, not a novelty one. It is the material behind prototype housings that need to be handled the same day they are printed, replacement knobs and clips for appliances that no longer have parts support, jigs and fixtures for small production runs, architectural massing models, and classroom printers that run eight hours a day with a teacher watching the first layer. It is also the correct choice for anyone who has just assembled a first printer and wants the variables reduced to one: learn the machine on material that behaves.


Frequently Asked Questions

Q: Will this work with my printer?

If your printer uses 1.75mm filament, yes. The spool fits standard holders and the 190-210C band is inside the default PLA profile shipped with nearly every FDM machine, including multi-material systems that feed from an enclosure.

Q: Why does diameter tolerance matter so much?

The extruder grips and pushes filament by diameter. When diameter drifts, flow volume drifts with it, and wall thickness changes mid-print. A tight plus or minus 0.03mm tolerance keeps the flow math honest from the first layer to the last.

Q: Do I need a heated bed?

Not strictly, but 50-60C greatly improves first-layer adhesion on glass and PEI. On an unheated bed, use a glue stick or blue tape as the listing notes.

Q: What is the difference between standard and silk PLA?

Standard PLA prints at 190-210C and gives the strongest, most dimensionally stable parts. Silk blends print hotter, 200-230C, and slower, 30-60mm/s, trading some layer strength for a glossy, low-shrinkage finish.

Q: How should I store a partially used spool?

Reseal it with a desiccant pack. PLA absorbs moisture from the air, and wet filament produces stringing, inconsistent extrusion and popping sounds at the nozzle. A dry box is a cheap fix for an expensive habit.

Q: How much can I print with one kilogram?

Roughly 300-330 meters of 1.75mm filament, which translates to several dozen medium parts or one large multi-day project depending on infill and wall count.


Customer Reviews

Customer Reviews

Based on 3 reviews
67%
(2)
33%
(1)
0%
(0)
0%
(0)
0%
(0)
E
Emory Z.
Survived a month on a classroom printer

Runs eight hours a day at 200C and has not clogged once. Bed adhesion at 60C on PEI is reliable without glue, and the marble blend looks good enough to put on a display shelf.

N
Nadia Q.
Good default PLA, and better once dried

One spool was usable straight out of the bag, another needed an hour in a dryer before the stringing stopped. That is normal for PLA but worth knowing. Layer adhesion and rigidity are both better than the bargain spools I had been buying.

C
Casper X.
Dimensional accuracy holds across the whole spool

Printed a set of forty identical brackets from one spool and the last one measured the same as the first. No diameter drift, no popping at the nozzle, and the surface finish was consistent at 205C on a stock profile.

Payment and Security

PayPal

お支払い情報は安全に処理されます。 クレジットカードの詳細を保存したり、クレジットカード情報にアクセスすることはありません

発送予定

You may also like

Recently Seen