説明
Every rotating object in your workshop begins with a point of failure: the bearing. The Fulcrum is that point engineered properly. A machined steel housing, a sealed ball-bearing race, and a load rating of 300 pounds mark the difference between hardware that rotates for a season and hardware that rotates for a decade. When a display stand, a chair base, or a jig table turns smoothly under real weight, you are feeling the result of tolerances measured in hundredths of a millimeter.
Whether it is a display stand in a retail window, a rotating base under a heavy chair, a lazy susan in a commercial kitchen, or a jig table in a fabrication shop, the principle is identical. Load must move smoothly, without wobble, without grinding, without the lateral play that turns a turntable into a rattling liability. The Fulcrum carries that load on a sealed race that keeps grit and moisture out of the balls, so the smoothness you feel on day one is the smoothness you get on day five hundred.
The Fulcrum delivers that stability in four sizes, each drilled with pre-threaded mounting holes and finished in corrosion-resistant steel. Screws are included, installation takes minutes, and once mounted, it becomes the quiet, invisible backbone of anything you want to turn by hand. It will outlast every project you put on top of it.
Heavy things should turn as easily as light ones. That is what engineering is for.
What separates a premium turntable from a bargain is not the plate, it is the race. The Fulcrum uses a sealed ball-bearing assembly in which the balls ride in a hardened channel machined to tight tolerances. That is why the rotation feels the same loaded or unloaded, why there is no wobble at the edge of a six-inch plate, and why the mechanism never needs re-greasing or adjustment.
Sealing matters more than most people realize. In a kitchen, flour dust and steam find their way into open bearings and turn them gritty within months. In a workshop, metal filings do the same. The Fulcrum keeps its internals clean, which is why the smoothness you feel on installation is still there after years of service.
Key Features
- ✦ 300 lb load capacity — supports heavy chairs, equipment, and retail displays without sag
- ✦ Sealed ball-bearing race — smooth 360-degree rotation with minimal play and no grinding
- ✦ Square steel plate design — easy to mount under square or rectangular surfaces
- ✦ Pre-drilled mounting holes — screws included, ready to install in minutes
- ✦ Four sizes — choose 2, 3, 4, or 6 inch to match your footprint
- ✦ Corrosion-resistant finish — survives kitchens, garages, and humid workshops
- ✦ Quiet operation — sealed bearings mean no squeaks, no dust ingress, no maintenance
Technical Specifications
- Available Sizes: 2 inch, 3 inch, 4 inch, 6 inch
- Material: Steel with sealed ball bearing
- Load Capacity: Up to 300 lbs (136 kg)
- Rotation: 360 degrees, smooth and silent
- Mounting: Pre-drilled holes with included screws
- Plate Shape: Square
- Typical Uses: Lazy susans, swivel chairs, display turntables, jig bases, TV stands
Application Scenarios
Cabinetmakers mount it under rotating spice racks and corner shelf units. Retail designers use it to build turntables for footwear and electronics displays, letting customers inspect a product from every angle without touching it. Mechanics install it beneath heavy swivel seats and service carts. Photographers rotate product setups for 360-degree shots in a single seamless sweep. Woodworkers bolt it to a workbench for a rotating assembly jig. In every case, the requirement is identical: smooth rotation under real weight, for years of daily use, without maintenance.
Frequently Asked Questions
Q: Can this support a person sitting in a swivel chair?
A: Yes. The 300 lb rating comfortably covers the weight of an adult and a typical office or gaming chair frame, with margin to spare.
Q: Is the rotation smooth or does it catch?
A: The sealed ball-bearing race rotates smoothly with no catching, and the bearing is shielded from dust and debris that would cause binding over time.
Q: Are mounting screws included?
A: Yes, screws are included with each plate, and the pre-drilled holes match standard fastener sizes for wood, MDF, and metal surfaces.
Q: Which size should I choose?
A: Match the plate size to your surface footprint. A 6-inch plate suits large round tables and chair bases; 2-3 inch plates fit compact displays and small fixtures.
Q: Will it rust in a humid environment?
A: The steel is finished with a corrosion-resistant coating suitable for kitchens, greenhouses, and coastal workshops.
Q: Can I mount it on a round surface?
A: Yes, the square plate centers easily under round tabletops and platters, and the mounting holes provide four secure anchor points.
Customer Reviews
Payment and Security
お支払い情報は安全に処理されます。 クレジットカードの詳細を保存したり、クレジットカード情報にアクセスすることはありません