The Low Fog | 1500W RGB Stage Smoke Machine with 10 m Wireless Remote

20%セーブ
East Supplier PlatformSKU: 1005007884972838-GERMANY-EU Plug

価格:
$106.74 $133.42

税込み 送料計算済み チェックアウト時

在庫:
在庫あり

説明

Atmosphere in a room is mostly a lighting problem disguised as a smoke problem. Haze that is too thin leaves beams invisible; fog that is too dense turns a stage into a car park on a wet morning. A 1500W heater with a 1 litre tank sits in the useful middle of that range, producing a low, slow-moving layer that holds a beam without burying the performers.

The six RGB LEDs in the nozzle face are what separates this from a plain fogger. Instead of lighting the fog from a separate fixture and hoping the two line up, the color leaves the machine already mixed, so a wash across the floor arrives tinted rather than white with a colored edge on it. Warm-up is about six minutes from cold, and the remote works to ten meters, which is enough to trigger cues from the side of a floor rather than from behind the equipment.

The body is metal, which matters when a machine is loaded in and out of a van twice a week. The 1 litre tank gives roughly forty minutes of intermittent cueing rather than continuous output, which is the correct duty cycle for a machine in this class: heat, fire, recover, fire again. Power is 90 to 240 volts, so it travels between countries without a transformer.

You are not selling fog. You are selling the three seconds before the first beat lands.


What Makes It Different

  • 1500W heater with 1 litre tank — enough output for a room of 150 to 300 people without cycling down mid-song.
  • Six RGB LEDs in the nozzle — color is mixed at the source, so the floor wash arrives tinted instead of white.
  • 10 meter wireless remote — cue from the side of the stage, not from behind the rack.
  • Six minute heat-up — practical for a set change where the machine was off between acts.
  • Metal housing — survives transport in a case or the back of a van, unlike the plastic-shell machines at this price.
  • 90 to 240V input — works on UK, EU, US and Australian mains without a step-up transformer.

Technical Specifications

  • Power: 1500W, AC 90 to 240V, 50/60Hz
  • LED Array: 6 x RGB LEDs, 3W each
  • Heating Time: Approximately 6 minutes
  • Tank Capacity: 1 litre
  • Control: Wireless remote, range up to 10 meters
  • Housing: Metal shell, black finish
  • Power Cord: Approximately 120.5 cm
  • Protocols: Standalone with remote; DMX stage lighting compatible
  • Certification: CE, FCC, RoHS
  • Battery: Included for the remote

Where It Belongs

Mobile DJs and small venues are the core use: a wedding reception, a bar with a 6 meter stage, a party room where a floor-level haze layer makes the moving heads worth their price. Theatres and school productions use it for low-lying mist across a set without needing a cryogenic CO2 system. Photographers and videographers run it for atmosphere behind a subject, and event planners use the color LEDs to match a room's palette without hiring separate uplighting. Churches and car show organizers use it for beam visibility where haze machines are not permitted, because fog dissipates faster and leaves less residue on fixtures.

Questions Buyers Ask

Q: How long does one tank last?

A: About 40 minutes of intermittent cueing on a full litre. Continuous output will empty it much faster, and the heater needs recovery time between bursts anyway.

Q: Does it leave residue on equipment?

A: Water-based fog fluid leaves far less residue than oil-based haze, but it is not zero. Ventilate the room and keep the nozzle pointed away from fixtures and lenses.

Q: Can I control it with DMX?

A: The machine is designed for standalone operation with the supplied wireless remote. For DMX cueing in a show, place it on a switched channel or use a DMX-capable fogger instead.

Q: Will it work in the US?

A: Yes. The input is 90 to 240 volts, so it runs on 120V US mains with the correct plug adapter. Output is lower on 120V than on 230V, which is normal for a heater of this type.

Q: How much area does it cover?

A: Realistically a room of 150 to 300 people with normal ceiling height. Above that you need a larger heater or two machines positioned at opposite ends.

Q: What fluid should I use?

A: A standard water-based fog fluid. Do not use homemade mixtures or oil-based haze fluid in a heater designed for water-based fog, as it will clog the pump and block the heating block.

Customer Reviews

Customer Reviews

Based on 3 reviews
67%
(2)
33%
(1)
0%
(0)
0%
(0)
0%
(0)
G
Greta F.
Metal body survived a full season of load-ins

This replaced a plastic machine that cracked at the tank collar. Two gigs a week in and out of a van and the housing still looks new, and the output has not dropped off with the standard fluid.

F
Florian S.
Six minutes to heat is honest

It does take the stated six minutes from cold, so plan the first cue accordingly. Once warm it recovers quickly between bursts. The remote works from the far side of the floor as advertised.

E
Eudora B.
Enough output for a 200 seat room

Filled the tank and ran cues between sets at a wedding reception. The floor layer held long enough for the first dance beams to read properly, and the six LEDs tinted it to the room's blue palette without a separate uplight.

Payment and Security

PayPal

お支払い情報は安全に処理されます。 クレジットカードの詳細を保存したり、クレジットカード情報にアクセスすることはありません

発送予定

You may also like

Recently Seen