説明
A Lathe Does Not Add Material. It Reveals What Was Already There.
Twenty-four watts reads like a figure borrowed from a desk lamp, and that is exactly why this machine surprises people. Power in a miniature lathe is not about brute force; it is about holding spindle speed steady while a cutting tool bites into brass, aluminium or resin. A motor that sags under load tears the surface and leaves a finish you have to sand away, which is the whole reason bench machining gets abandoned. This unit holds 20,000 revolutions per minute, the body is cast rather than folded sheet, and the tool post locks at the angle you set, so a second pass follows the first instead of wandering away from it.
The footprint is the real argument. A full-size lathe asks for a corner of the workshop, its own circuit and a reason to be switched on every day. This one sits on an ordinary bench, runs from a standard 220V socket and is ready again in the twenty spare minutes between other jobs. That is how small machining actually happens: in short windows, on small stock, with tolerances that still decide whether the assembly goes together.
It works soft metals, plastics and resin rather than hardened steel, and it is honest about that boundary. What it will do is turn a bushing to size, face a small shaft, clean up a thread, cut a decorative ring, or reproduce a part that no longer exists in any catalogue. The EU and UK plug variants cover the two supply standards it was built for, and a CE mark sits behind the electrical safety claim.
It is not a scaled-down version of a machine shop. It is a machine shop that fits the space you actually have.
Key Features
- Spindle Speed — 20,000 RPM motor that holds speed under light cutting load for a repeatable surface finish
- Motor Rating — 24 W, sized for bench work and an ordinary 220V socket
- Body Construction — Cast structure that resists the flex which turns a clean cut into chatter
- Tool Post — Locks at the set angle so depth of cut stays where you left it
- Bench Footprint — Compact enough to live on a workbench and be moved between jobs
- Plug Variants — 220V EU and 220V UK configurations available
- Certification — CE marked
- Working Stock — Light metals, plastics, resin and modelling materials
Technical Specifications
- Motor Power — 24 W
- Spindle Speed — 20,000 RPM
- Machine Type — Miniature metal rotating lathe, manual operation
- Bed / Body — Cast construction
- Tool Post — Adjustable and lockable
- Power Supply — 220V
- Plug Variants — EU and UK
- Certification — CE
- Condition — New
- Mounting — Bench-top
- Control — Operator-controlled feed, not CNC
- Intended Stock — Light metals, plastics, resin, modelling materials
Where It Earns Its Bench Space
Model engineers reach for it when a casting needs a boss faced or a wheel turned to a true diameter. Jewellers and watch repairers use it for ring stock and small fittings. RC builders use it for spacers, axles and adaptors that are never in stock in the size required. Small fabrication shops use it to reproduce an obsolete part instead of quoting a customer a three-week lead time. It also earns its place in teaching, because the relationship between tool angle, spindle speed and surface finish is visible on this machine in a way that a guarded industrial lathe never shows a beginner.
Before You Commit
Q: Can it cut steel?
A: No. The design target is light metals, plastics and resin. Hardened steel needs far more spindle torque and a much heavier machine. Treat aluminium, brass, copper, plastics and resin as the working range.
Q: Is it CNC controlled?
A: No. This is a manual bench lathe and the operator controls the feed by hand, which is what keeps the price in bench-tool territory and the setup time near zero.
Q: What power supply does it need?
A: 220V. EU and UK plug variants are stocked. In a 110V region you will need a step-up transformer rated comfortably above the motor draw.
Q: How much bench space does it take?
A: It is a miniature machine built to fit an ordinary workbench, so it does not require a dedicated stand or a workshop corner. Fasten it down and it is ready.
Q: Does it arrive ready to cut?
A: Expect basic fitment work: mount the machine securely, fit the tool post and check chuck and tailstock alignment before the first pass. That ten minutes of setup is what separates a good finish from a ruined blank.
Q: Why does spindle speed matter more than wattage?
A: Because surface finish is a function of cutting speed, not motor size. Constant speed under load is what a heavy cut needs, and it is the reason a steady 20,000 RPM motor outperforms a larger motor that bogs down.
Customer Reviews
Payment and Security
お支払い情報は安全に処理されます。 クレジットカードの詳細を保存したり、クレジットカード情報にアクセスすることはありません