説明
A hot tub cover is a lid that weighs as much as a small child, and the reason people stop using their spa in the second winter is not the water temperature. It is the lid. The Spa Lever turns that daily lift into a fold and a push.
The frame is 6063-T5 aluminum alloy, which is the grade chosen for outdoor structural work because it resists the corrosion that comes with chlorinated water and wet decks. It mounts underneath the tub on both sides, so the mechanism is out of the walkway rather than bolted to the apron where knees and shins find it. A triangular support at each base carries the load through the frame instead of through a single bolted joint, and the bracket height adjusts through holes in the side poles to suit tubs from 31.5 to 41.3 inches tall.
The unit fits rectangular tubs from 75 to 102 inches long and 57 to 92.5 inches wide, weighs 4.76 kg, and includes a three-hook towel rack with cushioned handles - which is a small thing until you are standing wet on a deck wondering where the towel went. It is not designed for sunken tubs, and that is a real limitation rather than a footnote.
The point of a spa is the water. Everything between you and the water should disappear.
Design Details
- 6063-T5 aluminum alloy frame built for wet, chlorinated environments
- Underneath-both-sides mounting keeps the mechanism out of the walkway
- Fits rectangular tubs 75 to 102 inches long, 57 to 92.5 inches wide
- Adjustable bracket height for tubs 31.5 to 41.3 inches tall
- Triangular base support distributes load through the frame
- Three-hook towel rack with cushioned handles included
- 4.76 kg assembly, single-person fold and push operation
- Full hardware pack including bushings, locknuts and screw caps
Fit and Dimensions
- ModelSCL-05L
- Main material6063-T5 aluminum alloy
- MountingUnderneath, both sides of the tub
- Tub length range75 to 102 in / 190 to 259 cm
- Tub width range57 to 92.5 in / 145 to 235 cm
- Tub height range31.5 to 41.3 in / 80 to 105 cm
- Product dimensions12.4 x 63.0 x 46.1 in / 315 x 1600 x 1170 mm
- Product weight10.5 lbs / 4.76 kg
- ExtrasThree-hook towel rack, cushioned handles
- Not suitable forSunken tubs
- InstallationAssembly and fixing required, hardware included
- CertificationCE
Decks It Belongs On
This is for the owner of a rectangular above-ground or partially recessed tub who has stopped lifting the cover by hand. It suits spa decks, rental cabins and holiday lets where guests of varying strength have to open the tub unaided, and it is common on massage bathtubs in smaller wet rooms where the cover has to end up somewhere rather than be carried away. The towel rack does the second job that every spa owner improvises badly.
Fitting Questions
Q: Will it fit my tub?
Measure three things: length between 75 and 102 inches, width between 57 and 92.5 inches, and height between 31.5 and 41.3 inches. If the tub is rectangular and inside those ranges, it fits. Curved or rounded shells need a different product.
Q: Does it work on a sunken tub?
No, and the manufacturer states it plainly. The mechanism mounts underneath the tub and both sides need to be accessible. A tub set into a deck with no side access cannot take this lift.
Q: How heavy a cover can it carry?
The lift carries a standard insulated cover of the size range it fits, and the triangular base support is what keeps the load off a single joint. Foam-filled covers with a vinyl skin are the intended case; a cover waterlogged with years of absorbed moisture weighs far more and should be replaced first.
Q: Does installation require drilling?
Yes. The base plates fix to the tub structure and the brackets bolt to the cover, which is why the hardware pack includes bushings, locknuts, screw caps and two sizes of countersunk screws. The screw caps are there for the parts you can see.
Q: Can one person open the tub?
That is the purpose. The cover folds and pivots on the frame, so it is a push rather than a lift. A child or an older guest should be able to open the tub, which is often the actual reason people buy it.
Q: Will it hold up in winter?
The aluminum alloy does not rust, which removes the main failure mode on a wet deck. Snow load on the cover itself is a separate question - clear heavy snow rather than relying on the lift to hold it.
Q: How long does installation take?
A couple of hours for a competent DIY install, including measuring, fixing the base plates and setting the bracket height. Two people make it considerably easier because the cover has to be aligned while the brackets are tightened.
Q: Does it need clearance behind the tub?
Yes. The cover swings up and back, so leave room for its travel. The dimensions to check are the folding path, not just the tub footprint.
Q: What is in the box?
Two upper connection elbows, a middle straight pipe, two lower elbows, two aluminum base plates, M10 bolts and washers, bushings, locknuts, screw caps and two sizes of countersunk self-tapping screws - a complete fixing kit rather than a partial one.
Q: Is there a warranty?
Covered against manufacturing defects in the aluminum frame and fittings. Cosmetic wear on the cushioned handles and the towel rack is normal in outdoor use and is not a defect.





Customer Reviews
Payment and Security
お支払い情報は安全に処理されます。 クレジットカードの詳細を保存したり、クレジットカード情報にアクセスすることはありません
