説明
A stripped thread ends a repair. There is no clever fix and no bracket that hides it, so the only useful response is to cut a new thread properly. The Thread Standard is the set that makes that possible in a shed: fifty-one taps, fifty-one dies, and the wrenches, gauges and extractors needed to use them, packed into one case that weighs thirteen pounds and closes.
The steel is the argument. Bearing steel hardened to HRC56, machined on CNC equipment, heat treated at 800 °C, then polished twice. That sequence is why the cutting edges stay sharp through stainless and cast iron instead of rounding off on the third hole. The hex dies spread cutting force evenly through six flats, which is the difference between a die that lasts and one that cracks at the split. Tapered starting teeth on the taps let the tool bite square before it has to cut at full depth.
Coverage runs from M3 to M20 in metric and the matching SAE sizes, with both pitch gauges in the case so an unknown bolt can be identified before a thread is cut. Five extractors handle the jobs where the thread is already gone: drill, seat, turn out, and the hole is ready for the next size up or a helical insert.
A repair that holds is a measurement made accurately. The tool only has to be right once.
What the case contains
- ✦ 51 taps and 51 dies, metric and SAE in one set
- ✦ Tap wrenches in two sizes, M3 to M12 and M6 to M20
- ✦ Die wrenches at 25.4 mm and 38 mm, plus a T-type tap wrench
- ✦ Metric and SAE screw pitch gauges for identifying unknown threads
- ✦ Five screw extractors for removing broken studs and stripped bolts
- ✦ HRC56 bearing steel with 800 °C heat treatment and double polishing
- ✦ Blow-moulded case with moulded seating for every piece
Tool data
- Model: 116PC
- Piece count: 116
- Contents: 51 taps, 51 dies, T-type wrench, screwdriver, 2 tap wrenches, 2 die wrenches, 2 pitch gauges, 5 extractors
- Material: bearing steel
- Hardness: HRC56
- Wrench material: zinc alloy
- Thread standards: metric and SAE
- Net weight: 6 kg / 13.23 lbs
- Case size: 47 x 6 x 31.5 cm
- Heat treatment: 800 °C, dual polish
- Die form: hexagonal, even force distribution
- Tap form: tapered start, through and blind hole use
The work it was built for
Restoration shops buy the set because old machinery uses thread forms that no hardware store carries, and a single replacement stud can stall a rebuild for a week. Maintenance fitters use it on pump housings, gearbox casings and engine blocks where a helicoil is the last option before scrap. Agricultural and marine mechanics work in salt and grit, where a thread cut into cast aluminium has to be clean the first time because a second attempt removes too much material. Home mechanics buy it once and keep it for the jobs that arrive without warning: a snapped exhaust stud on a Sunday, a stripped sump plug, a bracket that needs one more hole in a place no drill will reach.
Workshop questions
Q: Will these cut stainless steel?
A: Yes, with cutting fluid and a slow, deliberate feed. Bearing steel at HRC56 handles 304 and 316 provided the tap is reversed a quarter turn to break the chip, rather than driven straight through.
Q: What is the difference between the two tap wrenches?
A: Size. The smaller one holds M3 to M12 taps for hand work in tight spaces. The larger covers M6 to M20 and gives the leverage a big thread needs in steel.
Q: How do I identify an unknown thread?
A: Use the two pitch gauges in the case. Offer the metric gauge first, then SAE, until the teeth sit flush across several threads. Then measure the outside diameter with a caliper and match it against the corresponding tap.
Q: Are the dies adjustable?
A: The hex dies are fixed size. For a slightly oversize thread, use the die in the larger wrench and work in small increments with cutting oil rather than forcing a full pass.
Q: What do the extractors actually grip?
A: The fluted left-hand taper bites into the remains of a bolt as it turns counter-clockwise. Drill the correct pilot size first, or the extractor has nothing to bite.
Q: Does the case survive a workshop?
A: The blow-moulded case has moulded seating for each piece, so the tools do not migrate in a van. Keep the taps oiled and the case closed and they will outlast the job they were bought for.
Q: Is one kit enough for a small business?
A: For repair work, yes. A production shop cutting the same thread all day will want a machine tap for that size, but this set covers everything a repair bench meets in a week.





Customer Reviews
Payment and Security
お支払い情報は安全に処理されます。 クレジットカードの詳細を保存したり、クレジットカード情報にアクセスすることはありません
