説明
A Desk Is Not Furniture. It Is the Instrument Panel of a Working Mind.
Everything you build starts at the height of your eyes and the angle of your wrists. The Walnut Terrace exists because the surface under a laptop decides more about a working day than the laptop itself - whether the neck cranes, whether the shoulders climb, whether the screen sits low enough that concentration has to fight posture. Cut from solid North American black walnut, the platform raises a screen to eye level and holds it there without a single clamp or screw on the desk itself.
The structure is modular on purpose. Sections slide and rotate along the 23 cm baffle spacing, so the same stand becomes a laptop riser in the morning, a monitor plinth in the afternoon, and a storage shelf for drives and notebooks at the end of the week. Each layer is rated to 50 kg, which is far beyond what a display and a docking station demand - the surplus is what keeps the platform silent under load, with no creak and no flex as you move through the day.
Available in four widths that share a 230 mm depth, the stand is designed to be extended rather than replaced. Start with 750 mm for a single notebook; add a 1350 mm section later and the two read as one continuous walnut surface. A protective matte coating seals the grain against coffee rings and daily contact while leaving the figure of the wood visible, and assembly is nothing more than screwing the legs in with the supplied wrench.
It does not hold your laptop. It holds your attention.
Key Features
- ✦ Cut from solid North American black walnut - the same stock used for fine furniture, not veneered particle board.
- ✦ Modular sections slide and rotate independently, so the riser reshapes itself around a 13-inch ultrabook or a 32-inch display.
- ✦ Each layer carries 50 kg - a loaded monitor arm, a docking station and a stack of reference books will not flex it.
- ✦ Four widths (750 / 950 / 1150 / 1350 mm) share a 230 mm depth, letting you build a continuous desk platform in stages.
- ✦ Rolling accessory movement keeps cables, pens and drives under the platform instead of across it.
- ✦ Assembles on the desktop with a wrench - no drilling, no wall anchors, nothing that cannot be undone in a rented office.
Technical Specifications
- MaterialSolid North American black walnut wood
- StructureModular combination - sliding and rotatable sections
- Surface TreatmentProtective matte coating, hand sanded
- Load Bearing50 kg per layer
- Baffle Spacing23 cm between upright rails
- Available Widths750 mm / 950 mm / 1150 mm / 1350 mm (all 230 mm deep)
- Height ProfileLow-profile riser, 1st floor level
- AssemblyDesktop assembly, no drilling, no wall fixing
- FunctionsOrganise, rotate, store, rolling accessory movement
- StyleMid-century / medieval workshop
- ColourNatural walnut grain, clear finish
- OriginMainland China
Where It Belongs
The Walnut Terrace is built for people whose desk is a permanent installation: engineers running simulation and CAD alongside chat, architects working between drawings and a second display, editors who need a monitor high and a laptop low in the same glance. It also suits the rented office - because nothing is drilled, nothing is anchored, and the whole platform lifts away in a minute and reappears somewhere else at the same height. In a home studio it doubles as a riser for a synthesizer or a turntable, where the walnut finish does the same work that a piece of furniture would.
Frequently Asked Questions
Q: Will it fit a 16-inch laptop with a separate monitor?
A: Yes. The widest 1350 mm section carries a 16-inch notebook and a 27-inch display side by side, with the 23 cm baffle spacing keeping the two separate so cables pass cleanly between them.
Q: Is this solid walnut or a veneer over particle board?
A: It is solid North American black walnut. The grain you see runs through the thickness of the board, not printed onto a surface film, which is why the colour deepens slightly over the first year.
Q: Do I need to drill into my desk?
A: No. The stand assembles on top of the desktop and the legs screw into the platform with the supplied wrench. Removing it leaves no marks at all.
Q: How much weight can one layer take?
A: 50 kg per layer. That is roughly four 32-inch monitors or a full server test rig, so a normal desktop setup uses only a fraction of the rated capacity.
Q: Will the finish scratch my desk?
A: The base of each leg is flat and the finish is smooth, so the stand sits steady without dragging. On a lacquered desk we still recommend lifting rather than sliding during the first setup.
Q: Can I combine two widths into one long platform?
A: Yes. All four widths share the same 230 mm depth and the same leg pitch, so a 750 mm and a 1150 mm section sit flush together and read as a single continuous surface.
Customer Reviews
Payment and Security
お支払い情報は安全に処理されます。 クレジットカードの詳細を保存したり、クレジットカード情報にアクセスすることはありません