Description
A cooler is only as good as the pressure holding it down. Move a Corsair Elite Capellix from an Intel board to an AM4 or AM5 build without the right retention hardware and the pump block sits unevenly, contact pressure drops on one side, and the temperature graph tells the story within a minute of load.
The Coldmount is the metal bracket kit that restores that pressure on AMD sockets. It fits the iCUE H100i, H115i and H150i Elite Capellix families on AM4, AM5 and AM3, replacing the retention hardware that either came with an Intel board or went missing in a move. The pieces are metal rather than molded plastic, because a bracket that flexes cannot hold consistent torque across a cold plate.
The kit arrives as a complete set with the bracket and the hardware needed to seat it. If you are carrying a cooler across a platform change, switching to a Ryzen board, or picking up a used Capellix without its AMD mounting parts, this is the piece that turns a box of cooler into a working build again.
Installation follows the AMD pattern: the stock backplate stays on the board, the standoffs thread through it, and the bracket caps them before the pump block goes down. No board removal, no drilling, and the same sequence whether the machine is a fresh build or a three year old case that is being upgraded in place. Once the cooler is down, check that the block rocks evenly in both directions. If it does not, the hardware is not seated and the temperature will tell you before the benchmark does.
Contact pressure is silent until it is wrong, and then it is the only thing you can see in the numbers.
Key Features
- ✦ Metal retention bracket for Corsair iCUE Elite Capellix coolers
- ✦ Fits the H100i, H115i and H150i Elite Capellix families
- ✦ Supports AMD AM4, AM5 and AM3 sockets
- ✦ Replaces missing or Intel-only mounting hardware
- ✦ Metal construction that holds torque without flexing
- ✦ Complete kit with the bracket and mounting hardware
- ✦ Straightforward install without removing the motherboard
Technical Specifications
- Type: CPU cooler mounting bracket kit
- Material: Metal
- Cooler Compatibility: Corsair iCUE H100i, H115i, H150i Elite Capellix
- Socket Support: AMD AM4, AM5, AM3
- Function: Restores retention pressure for the pump block
- Package Contents: 1 mounting bracket kit with hardware
- Installation: Backplate and standoff mounting, no motherboard removal
- Finish: Black coated metal
- Use Case: Platform change, replacement part, used cooler build
- Origin: Mainland China
Where It Earns Its Place
Builders moving a Capellix cooler from an Intel board onto a Ryzen system who find the AMD hardware missing from the box. Second hand buyers who pick up a cooler without its mounting kit and need the exact retention parts. Repair shops that keep a bracket on the shelf because a customer arrives with a cooler and no hardware. Anyone rebuilding after a move where the small bag of standoffs disappeared.
The EastSupplier Promise
Every unit is inspected before it leaves our warehouse, packed in protective packaging, and dispatched with tracking. If a piece arrives damaged or not as described, contact us within 30 days and we will make it right with a replacement or a refund. We answer messages in English within one business day.
Questions Buyers Ask
Q: Will this fit my H150i Elite Capellix?
Yes. The kit covers the H100i, H115i and H150i Elite Capellix families, which share the same retention pattern.
Q: Does it work with AM5?
Yes. AM4, AM5 and AM3 sockets are all supported, and the AM5 mounting holes follow the same spacing as AM4.
Q: Is this the same as the AMD bracket in the cooler box?
It is a cross compatible replacement for that bracket. It performs the same retention job on the same sockets, which is what matters when the original is missing.
Q: Do I have to remove the motherboard?
No. The bracket mounts using the existing backplate and standoffs, so the board can stay in the case for most builds.
Q: Is it plastic or metal?
Metal. A plastic bracket flexes under torque and cannot hold consistent pressure across the cold plate.
Q: Will it fit a Corsair cooler that is not an Elite Capellix?
The retention pattern is specific to the Elite Capellix line. Check the cooler model before ordering, since older generations use different hardware.
Q: What is included in the kit?
The mounting bracket and the hardware needed to seat it on an AMD socket.
Q: Does mounting hardware affect temperatures?
It affects contact pressure, and uneven pressure is one of the common causes of a pump block that looks mounted but runs hot on one core.
Q: What torque should I use?
Follow the cooler manual for the standoff torque and tighten in a cross pattern. The metal bracket tolerates the specified torque, which is the part a plastic kit cannot promise.
Q: Can I reuse my existing AMD backplate?
Yes. The kit works with the stock AM4 and AM5 backplate that ships on the motherboard, so there is no need to source a second one.
Q: Will it clear a tall RAM heatsink?
The bracket sits under the pump block rather than around the memory slots, so tall RAM modules are not affected by the retention hardware.
Customer Reviews
Payment and Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
