Description
Filament is the cheapest component of a print and the most common reason a print fails. A spool that measures 1.8 mm at one end and 1.7 mm at the other will clog a 0.4 mm nozzle within an hour, and no amount of slicer tuning recovers a session that was already lost. The Quiet Spool is a Geeetech pure PLA held to a 1.75 mm diameter with a tolerance tight enough that the extruder sees a consistent bite from the first layer to the last.
The winding matters as much as the diameter. Tangle free spooling means the strand lifts away without dragging a loop under the coil, which is the failure that turns a nine hour print into a bird's nest at hour six. Each roll is a full kilogram, 2.2 pounds of usable material, on a standard spool that fits the common holder without an adapter. PLA prints between 190 and 220 degrees Celsius with a bed at 45 to 60, gives off very little odor, and holds dimensional accuracy well enough for functional parts, jigs and enclosures, not just display pieces.
Twenty one colors are stocked, from Bone White and Warm White through Apple Green, Water Blue, Sand Gold and a Color Gradient, across five dispatch regions including the United States, United Kingdom, France, Australia and the Czech Republic. That range is the point. A print farm running one color per client order needs the shade to be repeatable between batches, and a single supplier holding the full palette is easier to keep consistent than four vendors each holding three.
Buy the spool that disappears into the object.
What Sets It Apart
- ✦ Pure PLA at 1.75 mm, held to a consistent diameter so the nozzle sees a steady bite
- ✦ Tangle free winding that lifts clean instead of dragging a loop under the coil
- ✦ Full 1 kilogram roll, 2.2 pounds of usable material per spool
- ✦ Standard spool geometry that fits common holders without an adapter
- ✦ Prints at 190 to 220 degrees Celsius with a 45 to 60 degree bed
- ✦ Low odor output, suitable for a home studio or a classroom
- ✦ Twenty one stocked colors including Bone White, Sand Gold and a Color Gradient
- ✦ Dispatch from the United States, United Kingdom, France, Australia and the Czech Republic
Technical Details
- Material Pure PLA
- Diameter 1.75 mm
- Net Weight 1 kg / 2.2 lbs
- Spool Standard 1 kg spool
- Winding Tangle free
- Print Temperature 190 to 220 degrees Celsius
- Bed Temperature 45 to 60 degrees Celsius
- Color Range 21 colors including Bone White, Sand Gold, Color Gradient
- Odor Low
- Application Prototyping, functional parts, home decor, cosplay
- Dispatch Regions United States, United Kingdom, France, Australia, Czech Republic
- Storage Sealed bag with desiccant, away from UV
- Brand Geeetech
- Package 1 spool per order
Where It Belongs
Print farms and small production shops buy by color to match client orders, where a repeatable shade between batches matters more than a two dollar price difference. Schools and makerspaces use it because the low odor and the 190 to 220 degree window make it safe on open frame machines in a shared room. Cosplay and prop makers work through Bone White and Warm White for priming and painting, while Sand Gold and the Color Gradient finish a part that will not be painted at all. Prototypers keep one spool of every neutral on the shelf so a design iteration never waits on a delivery, and the five dispatch regions mean the restock lands in days rather than weeks.
Questions Buyers Actually Ask
Q: Does it fit a standard spool holder?
A: Yes. The roll is wound on a standard one kilogram spool with a centre hole sized for common holders, so no adapter is needed on Prusa, Bambu, Creality or Ender class machines.
Q: What temperature should I print at?
A: Start at 205 degrees Celsius with a 55 degree bed and adjust from there. Thin walls and small details print cleaner nearer 195, while fast large parts benefit from 215 to 220 for better layer adhesion.
Q: Is it actually tangle free?
A: The winding is done so the strand lifts away without pulling a loop under the coil. Once you cut the retaining strap, keep tension on the free end and re-secure it before storage, because tangles almost always start with a loose end.
Q: How should I store a partial spool?
A: Return it to a sealed bag with the desiccant pack. PLA absorbs moisture slowly, and a damp spool produces stringing and popping sounds at the nozzle. A dry box is worth the cost if you live somewhere humid.
Q: Will the color match between two orders?
A: Within a batch the shade is consistent. Across batches, neutrals such as Bone White and Black are the safest for repeat work, while the Color Gradient is intentionally variable from spool to spool.
Q: Can it be used for functional parts?
A: Yes. PLA is rigid and dimensionally stable, which suits brackets, jigs, enclosures and prototypes. It softens in a hot car, so for outdoor or high temperature parts use PETG or ABS instead.
The EastSupplier Promise. Every unit is inspected before dispatch, ships from a vetted factory partner, and is covered by our replacement policy on manufacturing defects. Questions about bulk pricing, custom packaging or freight consolidation go to our sourcing desk and get answered by a human within one business day.
Customer Reviews
Payment and Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.