Description
Electrons Do Not Care About Convenience. They Care About Precision.
The feyree Type 2 Wallbox arrives at a peculiar moment in automotive history — when the vehicles have evolved but the infrastructure has been left to lag behind, an afterthought in the electric revolution. This is not a "charging cable." This is a current-management architecture designed to deliver exactly what the vehicle's battery management system requests, at exactly the voltage and amperage it demands, with exactly zero drama. The 22kW three-phase delivery capability means a full charge happens during a dinner party, not during a sleep cycle. The 7kW single-phase mode serves as a graceful fallback for installations where three-phase is unavailable or cost-prohibitive — adaptability baked into the silicon, not bolted on as a firmware patch.
The Wi-Fi control module represents the difference between a charger you operate and a charger you orchestrate. Through the companion application, you set charging schedules to exploit off-peak electricity tariffs, monitor real-time power draw with the granularity of a laboratory ammeter, and remotely start or pause sessions without stepping into the garage. The IP65-rated enclosure — tested against dust ingress and low-pressure water jets from any direction — means this unit can be mounted on an exterior wall facing the North Sea or a desert dust storm and continue delivering current without complaint. The integrated Type A + 6mA DC leakage protection is not a marketing checkbox; it is the difference between a nuisance trip that strands you at 3 AM and a charger that distinguishes between atmospheric moisture and an actual ground fault.
Installing a Wallbox is not a purchase. It is a declaration that you are done calculating range-versus-errands in your head, done leaving the house at 90% because 100% would mean waking up at 5 AM to move the car, done treating public charging stations as pilgrimage sites. The feyree Type 2 transforms your parking space from a concrete rectangle into a personal energy terminal. The 5-meter cable with its ergonomic connector handle makes the physical act of plugging in feel less like fueling and more like docking — a gesture that closes a circuit both electrically and psychologically. You arrive home, you plug in, you walk away. The car takes care of itself while you take care of everything else.
This is not a charger. It is the moment your home stops being a destination and starts being a power station.
Key Features
- ✦ 22kW Three-Phase / 7kW Single-Phase — Adaptive power delivery for residential and commercial installations
- ✦ Wi-Fi Smart Control — Schedule charging, monitor real-time power draw, and remote start/stop via mobile app
- ✦ IP65 Weatherproof Enclosure — Full dust protection and low-pressure water jet resistance for indoor/outdoor mounting
- ✦ Type A + 6mA DC Leakage Protection — Integrated RCD eliminates nuisance tripping while maintaining safety compliance
- ✦ 5-Meter Type 2 Cable — Ergonomic connector handle with strain-relief boot for daily-use durability
- ✦ Adjustable Current (6A–32A) — Fine-tune charging rate to match available circuit capacity or off-peak windows
- ✦ OLED Display + LED Status Ring — At-a-glance charging status, fault codes, and session energy delivered
Technical Specifications
- Charging Standard: IEC 62196-2 Type 2 (Mennekes)
- Maximum Power: 22kW (3-Phase 32A) / 7kW (1-Phase 32A)
- Input Voltage: 400V AC ±10% (3-Phase) / 230V AC ±10% (1-Phase)
- Adjustable Current Range: 6A / 8A / 10A / 13A / 16A / 20A / 25A / 32A
- Enclosure Rating: IP65 (Dust-tight, Water Jet Resistant)
- Residual Current Protection: Type A + 6mA DC (IEC 62955)
- Connectivity: Wi-Fi 2.4GHz 802.11 b/g/n with app control (iOS/Android)
- Cable Length: 5 meters (16.4 ft) with Type 2 connector
- Operating Temperature: -25°C to +55°C (-13°F to 131°F)
- Certifications: CE, RoHS, IEC 61851-1, IEC 62196-2
Application Scenarios
The feyree Type 2 Wallbox is engineered for the homeowner who has committed to the electric transition and refuses to let charging logistics dictate their schedule. It serves single-family residences with off-street parking — mounted on garage walls, carport pillars, or exterior façades — where the 22kW three-phase mode turns a dinner engagement into a full recharge window. Apartment building operators and fleet managers deploy the 7kW single-phase configuration across multiple bays, using the Wi-Fi backend to load-balance across circuits and bill tenants or drivers by session. Workplace installations turn employee parking lots into de facto fueling stations, with scheduled charging aligning neatly with 9-to-5 occupancy. In all cases, the feyree Wallbox replaces the ritual of detour-and-wait with the rhythm of plug-in-and-forget — a shift in energy logistics that feels less like an upgrade and more like a redefinition of what "refueling" means.
Frequently Asked Questions
Q: Does this charger work with my Tesla / BMW / Mercedes / Hyundai?
A: Yes. The Type 2 (Mennekes) connector is the European standard for AC charging, compatible with all EVs sold in the EU/UK market including Tesla (Model 3/Y/S/X with adapter), BMW i-series, Mercedes EQ, Hyundai Ioniq, Kia EV6, Volkswagen ID, Audi e-tron, Porsche Taycan, Renault Zoe, and all other Type 2-equipped vehicles. North American customers should verify their vehicle uses the Type 2 inlet (common on imported European EVs).
Q: Can I install this charger outdoors without additional weatherproofing?
A: Yes. The IP65 enclosure rating means the feyree Wallbox is designed for permanent outdoor installation without additional covers or shelters. It withstands rain, snow, dust, and temperature extremes from -25°C to +55°C. The only installation consideration is ensuring the mounting surface is structurally sound and the electrical supply cable entry maintains the enclosure's ingress protection.
Q: What is the difference between the 22kW and 7kW models — and which should I choose?
A: The 22kW model requires a three-phase 400V supply (common in European homes and commercial buildings) and delivers a full charge in 1.5–2.5 hours for typical 40–60 kWh EV batteries. The 7kW model operates on single-phase 230V and charges the same battery in 6–8 hours — ideal for overnight residential charging. Choose based on your electrical supply: if you have three-phase power at the installation point, the 22kW version provides maximum future-proofing. If single-phase only, the 7kW version is already sufficient for overnight full-charge cycles.
Q: Does the Wi-Fi connection require internet access to charge?
A: No. The charger operates independently for plug-and-charge functionality. The Wi-Fi connection enables smart features — scheduling, remote start/stop, energy consumption tracking, and firmware updates — but the core charging function does not depend on cloud connectivity. If the Wi-Fi network is unavailable, the charger defaults to plug-and-charge mode at the last-set current limit.
Q: What electrical installation work is required?
A: Professional installation by a certified electrician is required. The charger must be connected to a dedicated circuit with appropriate MCB (miniature circuit breaker) and RCD protection. For 22kW three-phase: 32A Type B/C MCB + Type A RCD. For 7kW single-phase: 32A MCB + Type A RCD. Cable sizing depends on the distance from the distribution board — typically 6mm² minimum for short runs, 10mm² for longer cable paths. Local electrical codes may impose additional requirements.
Q: Can I lock the charger to prevent unauthorized use?
A: Yes. The mobile app supports "Authorize Start" mode — charging sessions require app approval before current flows. For physical security, the Wallbox can be mounted at height or inside a lockable enclosure. The unit itself does not include a physical key lock, as access control is managed through the software layer which provides more flexible authorization (family members, guests, time-window access).
Q: How does this compare to the Wallbox Pulsar Plus or Zappi v2?
A: The feyree Type 2 occupies the professional-installer tier at a significantly more accessible price point. Versus the Wallbox Pulsar Plus (7.4kW single-phase max), the feyree adds three-phase 22kW capability. Versus the MyEnergi Zappi v2 (which adds solar-divert functionality), the feyree prioritizes raw charging throughput and industrial-grade weatherproofing over eco-integration features. If your priority is maximizing charging speed and installation flexibility across single and three-phase sites, the feyree delivers the core value proposition without the brand premium.
Customer Reviews
Payment and Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.