Description
Order in a workshop is not tidiness. It is throughput.
A maker loses time in units of twenty seconds: find the M5 bolt, find the right length, find the washer that goes with it. Multiply that by two hundred fasteners in a week and the cost is not aesthetic, it is the difference between shipping a batch on Thursday and shipping it on Monday. Chaos in the small parts is expensive precisely because it never announces itself as a problem.
The Grid Array is a wall-mounted bin system with a modular back panel. The panel anchors to a wall or a bench backboard; the bins hang on it and can be lifted, repositioned, or carried to the job. That last property is the one that separates a working system from a storage product: a bin you can take to the machine is a bin that saves walking, and walking is the largest hidden cost in a small shop.
Sets are offered at 30 and 48 pieces, so the array can start small and grow along the same panel standard instead of forcing a wholesale replacement when the fastener collection outgrows it.
You are not buying bins. You are buying back the twenty seconds, two hundred times.
How a Modular Array Changes a Workday
- ✦Wall-mounted back panel keeps small parts at eye level and off the bench, freeing flat surface for actual work.
- ✦Bins lift off individually, so the right fasteners travel to the machine instead of the operator walking to the wall.
- ✦Uniform hanging geometry means bins can be re-ordered as the workflow changes, without new hardware.
- ✦30 and 48 piece sets share the same mounting standard, so expansion is additive rather than a rebuild.
- ✦Open-front bins make contents visible at a glance, which is the whole point of visual management.
- ✦Suitable for fasteners, electronic components, fittings, abrasives, and small tooling.
- ✦Wall mounting removes the drawer-stack problem where the part you need is always in the bottom drawer.
Technical Specifications
- System type: Modular wall-mounted bin array
- Set sizes: 30 pieces / 48 pieces
- Mounting: Wall or bench backboard, anchored back panels
- Bin style: Open-front, lift-off
- Reconfiguration: Bins reposition freely on the panel standard
- Intended contents: Screws, bolts, washers, fittings, electronic parts, abrasives
- Environment: Workshop, garage, stockroom, studio, van fit-out
- Expansion: Same panel standard across both set sizes
- Access: Single-hand lift-off, carry to bench
- Assembly: Wall fixings and panel joining included
Who Ends Up Depending On It
Small-batch manufacturers and repair shops use it to hold the fasteners for a running job, so a rebuild kit lives in one visible column instead of four drawers. Electronics benches use it for passives and connectors, where a mis-sorted reel costs an hour of rework.
It also fits the home garage of anyone who has graduated from a coffee tin of mixed screws, and the van or trailer fit-out where a wall panel turns a flat surface into a mobile parts department.
Setup and Practical Detail
How much wall space does a 30-piece set need?
Plan on roughly a metre wide by half a metre tall for the 30-piece configuration, and closer to a metre and a half for 48. The exact footprint depends on how you arrange the panels, which is the advantage of the modular standard: lay it out to fit the wall you have.
Can bins hold heavier parts like bolts and fittings?
Yes within reason. These are open-front parts bins, not load-rated containers. Distribute heavy items low on the panel and keep each bin to a comfortable fill rather than packing to the rim.
Do I need to build a backboard or can it mount straight to plasterboard?
Straight to plasterboard works only with proper hollow-wall anchors and light loads. For a real workshop, mount a plywood backboard to the studs first and fix the panels to that. It takes an extra hour and it will never sag.
Can I buy additional bins later to extend the array?
Yes, that is the design premise. Because both set sizes share the same hanging geometry, extra panels and bins extend the array without obsolescing what you already mounted.
Are the bins labelled?
They accept standard label strips or a marker on the front lip. Label by part number, not by name, because names drift and numbers do not. Consistent labelling is what makes the system survive contact with a busy week.
Is this suitable outdoors or in an unheated garage?
In an unheated garage, yes. In direct weather or constant UV, the plastics will eventually embrittle. If the wall is exposed to sun and rain, house it under a cover or choose a metal system.





The EastSupplier Promise
Every unit is inspected before it leaves the warehouse, packed against transit damage, and backed by a 30-day return window. If a specification on this page does not match what arrives, we replace it. Questions before you order go to a human, not a bot.
Customer Reviews
Payment and Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
