The Air Line | 15 m Retractable Compressed Air Hose Reel

Save 20%
East Supplier PlatformSKU: 1005007972153231-spain

Price:
$182.33 $227.91

Tax included Shipping calculated at checkout

Stock:
In stock

Description

Every workshop has the same fifteen seconds of wasted motion, repeated a hundred times a day: the hose on the floor, coiled wrong, snagged around a wheel, dragged across a freshly painted panel. The Air Line is a retractable reel with a 15 m working outlet, an automatic rewind and a stop at any length you pull. It does not make the compressor stronger. It removes the part of the job that has nothing to do with the work.

The specification is a working pressure of 18 bar against a 54 bar burst ceiling, which is a three-to-one margin on the hose itself. The outlet hose is 15 m of 3/8 inch PVC with a 1.4 m inlet, connected through BSP 1/4 inch fittings, so it matches the standard connector on most workshop compressors and air tools without adapters. The temperature range runs minus 5 to 45 degrees C, which covers an unheated garage in winter and a workshop in summer. The reel body is PVC and PP rather than steel, which keeps the wall load light while the mechanism stays sealed.

The mount is the practical detail. A wall or ceiling bracket with 180 degrees of rotation lets the reel face whichever direction the work is happening in, so the hose pays out toward the bay instead of across it. The attachment holder doubles as a carry handle if the reel needs to move between locations. Pull to a length, it locks; give it a short tug, it retracts. For a home garage with one compressor and one bay, this is the difference between a tidy workspace and a trip hazard.

A hose that puts itself away is a hose you stop tripping over.

Key Features

  • ✦ 15 m outlet hose plus 1.4 m inlet, with automatic rewind
  • ✦ Locking mechanism that holds the hose at any pulled length
  • ✦ 18 bar working pressure against a 54 bar burst ceiling
  • ✦ BSP 1/4 inch fittings compatible with standard compressors and air tools
  • ✦ Wall or ceiling mount bracket with 180 degree rotation
  • ✦ Suitable for garages, repair shops, DIY spaces and light industrial bays
  • ✦ Carry handle for moving the reel between locations

Technical Specifications

  • BrandDURHAND
  • Outlet hose15 m, 3/8 in PVC
  • Inlet hose1.4 m
  • Working pressure18 bar
  • Burst pressure54 bar
  • ConnectorBSP 1/4 in (6.35 mm)
  • Hose diameterUp to 3/8 in (9.5 x 15 mm)
  • MaterialPVC hose, PP and PVC reel body
  • Dimensions39 x 21.2 x 36.6 cm
  • MountingWall or ceiling, 180 degree rotation
  • Temperature range-5 C to 45 C
  • ReferenceB40-027V02

Where It Belongs

A home garage with a single compressor and one working bay; a repair shop where a hose across the floor is both a trip hazard and a scratch risk to finished panels; a detailing bay that needs air at the far end of a vehicle without dragging a coil; a woodworking shop running a blow gun and a nailer from the same line. The ceiling mount is the better position in a low bay, and the 180 degree rotation lets the reel follow the work rather than the other way around.

Questions Buyers Ask

What length of hose does it give me?

A 15 m outlet hose plus a 1.4 m inlet, so the working reach is about 15 m from the mounting point.

Does it rewind automatically?

Yes. A short tug releases the lock and the spring retracts the hose. Guide it back with your hand rather than letting it fly, which keeps it winding evenly.

Can I lock the hose at a specific length?

Yes. Pull to the length you need and the mechanism holds there until you tug again to release it.

What pressure is it rated for?

18 bar working pressure and 54 bar burst pressure, which is comfortably above typical workshop compressor output of 6 to 10 bar.

Will it fit my compressor?

The fittings are BSP 1/4 inch, the most common workshop standard. If your compressor uses NPT or a different thread, one adapter solves it.

Can it be mounted on a ceiling?

Yes. The bracket supports wall or ceiling mounting with 180 degrees of rotation.

What is the hose material?

PVC for the hose, with a PP and PVC reel body. This keeps the unit light for wall mounting while staying sealed against workshop dust.

Does it work in a cold garage?

The rated range is minus 5 to 45 degrees C. Below freezing the PVC stiffens, so let the hose warm before pulling it out fully.

Can I run a nailer or impact wrench from it?

Yes, within the pressure rating. Check the air consumption of the tool against your compressor output, since the reel does not add capacity.

Can the reel be moved between locations?

The attachment holder functions as a carry handle, so it can be lifted off the bracket and moved.

The EastSupplier Promise

Every unit is inspected before it leaves the warehouse and ships from the region closest to you. If a specification on this page does not match what arrives, we replace it. Requests are answered within one business day by people who handle the product, not a script. EastSupplier supplies brands, workshops and retailers across North America, Europe and Australia from a catalog of more than fifty thousand lines.

Customer Reviews

Customer Reviews

Based on 5 reviews
60%
(3)
40%
(2)
0%
(0)
0%
(0)
0%
(0)
D
Darragh Z.
Light on the wall, strong rewind

PVC and PP body keeps the wall load down, which mattered on a block wall. The spring is firm, so let it retract rather than releasing it from full extension. Working pressure is far above what my compressor puts out, so no worries there.

C
Cyprian H.
Fifteen metres without the tangle

Locks at whatever length you pull and retracts with a short tug, which sounds trivial until you stop tripping over hose a hundred times a day. The 180 degree bracket let me face it down the bay instead of across it. Fittings matched my compressor with no adapters needed.

A
Alistair N.
Good reel, guide it back by hand

Works exactly as described, locks at any length and retracts on a short tug. Let it fly back and it winds unevenly, so guide it. PVC hose is a little stiff in a cold garage at first.

B
Bastien T.
Ceiling mounted with the bracket rotation

Hung it from the ceiling in a low bay and the 180 degree swing lets me face whichever side of the car I am working on. Fittings matched my compressor directly, no adapters needed.

V
Verity B.
Ended the hose on the floor problem

Fifteen metres reaches the far end of the bay and the rewind puts it away in one tug. No more coiling, no more snagging on a wheel.

Payment and Security

PayPal

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Estimate shipping

You may also like

Recently Seen