Description
A stone worktop is a decision about permanence, cost and weight, and most kitchens do not need all three. The Marble Veil answers the question underneath that decision: what if the surface simply needed to look right, resist water and stay clean, without a slab being cut and carried through a doorway.
This is a paper backed vinyl with a light reflecting surface treatment, 60 cm wide and self adhesive, so it goes onto an existing worktop, cabinet front, table or shelf without adhesive, primer or a contractor. The finish is a printed marble with enough tonal variation to read as stone under normal room lighting rather than as a flat print, and the 3D surface treatment means the veining responds differently depending on where the light falls.
Practicality is where it earns its place. The film resists water, mildew, moisture, heat and smoke, and the extra thick grade means it does not tear at the corner when you lift an edge to reposition it. It is formaldehyde free and CE certified, so it is reasonable for a kids room, a kitchen or a rented flat where the deposit depends on leaving the original surface intact.
Widths start at one metre for a single shelf and run to ten metres for a full kitchen refit. Six marble patterns are available so a counter and its backsplash can be matched or deliberately contrasted.
Stone has weight, cost and a delivery date. This has a backing paper and an afternoon.
Key Features
- ✦ Self-adhesive paper backed vinyl, no glue or tools required
- ✦ 60 cm wide rolls in 1 m, 3 m, 5 m and 10 m lengths
- ✦ Light reflecting 3D surface with printed marble veining
- ✦ Water, mildew, moisture, heat and smoke resistant
- ✦ Extra thick grade that survives lifting and repositioning
- ✦ Formaldehyde free and CE certified, six marble patterns
Technical Specifications
- Material: PVC, paper backed vinyl wallpaper
- Width: 60 cm
- Length Options: 1 m, 3 m, 5 m, 10 m (charged by the roll)
- Application: Self-adhesive, peel and stick, repositionable
- Surface Treatment: Light reflection with 3D marble effect
- Resistance: Waterproof, mildew resistant, moisture proof, heat insulated, formaldehyde free
- Patterns: Marble B, D, 16A, 18A, 19A, 20A
- Model: WGFYT
- Typical Uses: Kitchen worktops, cabinet fronts, tables, shelves, rented interiors, kids rooms, retail display
- Certification: CE
- Note: Measure your surface with 5 to 10 percent extra to allow for pattern alignment and trimming
Where It Belongs
Tenants use it to cover a worktop that was not chosen by anyone in the flat and take it off again at moving day. Café owners wrap a service counter that would cost four figures to replace in stone. Small businesses cover display plinths and shelving where a consistent marble finish photographs better than mixed laminate. DIY restorers use the thicker grade on kitchen islands because it holds a clean edge where thinner vinyl lifts.
The EastSupplier Promise
- Sourced and checked by our own team, never drop-shipped blind from a third party.
- Tracked shipping with a real order reference, on every parcel.
- 30-day resolution window if the item arrives damaged or not as described.
- Bulk and trade pricing available for repeat buyers and event suppliers.
Frequently Asked Questions
Q: Does it need any glue?
No. The backing peels away to reveal an adhesive layer. Clean and dry the surface first, then press the film down and work out air bubbles from the centre outward.
Q: Can it go near a hob or a hot pan?
It is heat insulated and suit to use around a kitchen, but do not place hot pans directly on it and keep a gap around open flame or an uncovered burner.
Q: How much do I need for a worktop?
Measure the length and depth, multiply, and add 5 to 10 percent for trimming and pattern alignment. A standard 3 m worktop at 60 cm depth uses roughly 2 square metres, so a 5 m roll covers two runs.
Q: Can it be removed without damaging the surface?
Yes. Peel it back slowly from a corner and warm the film slightly with a hairdryer to loosen the adhesive. It is the standard choice for rented property for this reason.
Q: Will the joins be visible?
Overlap joins by about 1 cm and press them firmly. Pattern matching between rolls is approximate, so where two sheets meet try to align along a vein.
Q: Which pattern looks most like real marble?
Patterns B and D carry the strongest veining. 16A through 20A are quieter and work better where you want a surface to stay in the background.
Customer Reviews
Payment and Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.